1955 Chevy Radiator Core Support Upper Tie Bar, Pol. SS, AS-IS

1955 Chevy Radiator Core Support Upper Tie Bar, Pol. SS, AS-IS

The upper radiator support bar can get pretty beaten up over the years. Replace yours with this new Polished Stainless steel reproduction. This is a nice, new reproduction. NEW, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS.

  • Price: $199.95
  • Sale Price: $149.95

1955-1956 CHEVY CORE SUPPORT PANELS POLISH S.S. - NO Holes

1955-1956 CHEVY CORE SUPPORT PANELS POLISH S.S. - NO Holes

Laser cut of polished stainless; very nice. They are ONLY polished on the side that shows next to the radiator front. NO Horn Wire Holes.

  • Price: $129.99
  • Sale Price: $89.99

1955-1956 CHEVY CORE SUPPORT PANELS POLISH S.S. - WITH HOLES

1955-1956 CHEVY CORE SUPPORT PANELS POLISH S.S. - WITH HOLES

Laser cut of polished stainless; very nice. They are ONLY polished on the side that shows next to the radiator front. WITH Horn Wire Holes.

  • Price: $129.99
  • Sale Price: $89.99

1955-1956 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

1955-1956 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

Made in the USA. Laser cut 16 gauge metal; fit very good and do NOT have all the holes that the factory ones have for the voltage regulator and horn relay. Also do NOT have the ribs. YOU ARE PURCHASING ONE SET -- ONE RIGHT SIDE AND ONE LEFT SIDE.

  • Price: $94.95
  • Sale Price: $49.99

1955-1956 CHEVY RADIATOR SUPPORT TO FENDER SHIM KIT

1955-1956 CHEVY RADIATOR SUPPORT TO FENDER SHIM KIT

Stamped from mild steel, these are the shims that install between the upper radiator support bar and the fenders so you can adjust the gaps properly on your front end sheetmetal. Will work on any 1955-1956 classic Chevy model. You may also need...

  • Price: $8.99

1955-1956 CHEVY RADIATOR SUPPORT TO FENDER SHIM KIT, SS

1955-1956 CHEVY RADIATOR SUPPORT TO FENDER SHIM KIT, SS

New. Radiator Support to Fender Shim Kit for 1955 and 1956 Chevrolet Passenger cars. Made from Stainless Steel. 1168SS

  • Price: $15.99

1955-1957 Chevy 160° Thermostat

1955-1957 Chevy 160° Thermostat

A stuck thermostat will overheat your engine and strand you on the side of the road. Keep your ride in tip top shape with this most necessary part. This thermostat will open at 160°. Will work on any 1955-1957 classic Chevy as well as other...

  • Price: $7.99

1955-1957 Chevy 180° Thermostat

1955-1957 Chevy 180° Thermostat

A stuck thermostat will overheat your engine and strand you on the side of the road. Keep your ride in tip top shape with this most necessary part. This thermostat will open at 180°. Will work on any 1955-1957 classic Chevy as well as other...

  • Price: $7.99

1955-1957 Chevy Radiator Conversion Bracket -Pol. ss, w/hardware

1955-1957 Chevy Radiator Conversion Bracket -Pol. ss, w/hardware

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. These brackets will allow you to mount your V-8 radiator into the 6-cylinder position using your V-8 core support. comes w/ hardware.

  • Price: $75.99
  • Sale Price: $65.99

1955-1957 Chevy Radiator Conversion Bracket -Polished SS, Pair

1955-1957 Chevy Radiator Conversion Bracket -Polished SS, Pair

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. These brackets will allow you to mount your V-8 radiator into the 6-cylinder position using your V-8 core support. One pair.

  • Price: $59.99
  • Sale Price: $49.99

1955-1957 CHEVY RADIATOR CORE SUPPORT RUBBER CUSHIONS

1955-1957 CHEVY RADIATOR CORE SUPPORT RUBBER CUSHIONS

Make sure your radiator is supported correctly and cushioned as well. You may also need the Radiator Support to Fender Shim Kits #1168 or #1169.  604.

  • Price: $12.79

1955-1957 CHEVY RADIATOR HOSE CLAMPS, SET OF 4

1955-1957 CHEVY RADIATOR HOSE CLAMPS, SET OF 4

When rebuilding your cooling system, don't be tempted to use non-original screw clamps on your hoses. These spring clamps are just as effective, and won't look out of place. 1955-1957 Chevy Passenger Cars upper and lower radiator hose original style clamp set. 17-142.

  • Price: $3.99

1955-1957 Chevy Radiator Mount Plates - Cushions

1955-1957 Chevy Radiator Mount Plates - Cushions

Make sure your radiator is supported correctly and cushioned as well. includes 2 rubber spacers and 5 cardboard spacers. Fits all 1955, 1956 and 1957 Classic Chevy Passenger Cars and Wagons. #3.22.

  • Price: $12.99

1955-1957 Chevy Radiator Support Wire Harness Clip, each

1955-1957 Chevy Radiator Support Wire Harness Clip, each

New. This radiator support wire harness clip installs on the radiator crossbar to support the wiring harness. Will work on any 1955-1957 classic Chevy Full Size Car. 3 to 6 clips needed per car. One each. 12333. 20-183D

  • Price: $0.79
  • Sale Price: $0.49

1955-1957 CHEVY S.S. Hardware Kit for Radiator Conv. Brackets

1955-1957 CHEVY S.S. Hardware Kit for Radiator Conv. Brackets

Stainless Steel Hardware kit for our Radiator Conversion brackets.

  • Price: $17.99

1955-1957 Chevy Thermostat Gasket

1955-1957 Chevy Thermostat Gasket

Water leaks are a real pain and compromise your cooling sysem. When replacing your thermostat, don't forget a new gasket. Will work on any 1955-1957 classic Chevy model with a V-8 or 6-Cylinder as well as other vehicles you may have in your collection. 084, MCS2138.

  • Price: $1.99

1955-1957 CHEVY V-8 LOWER RADIATOR HOSE - GM Codes

1955-1957 CHEVY V-8 LOWER RADIATOR HOSE - GM Codes

These Radiator Hoses are correctly numbered with the GM codes used in 1955, 1956 and 1957 Chevy Passenger Cars with V-8 engines. These are the hoses for detail-oriented collectors and anyone seeking to restore the original factory look to their...

  • Price: $22.99

1955-1957 CHEVY V-8 UPPER RADIATOR HOSE - GM Codes

1955-1957 CHEVY V-8 UPPER RADIATOR HOSE - GM Codes

These Radiator Hoses are correctly numbered with the GM codes used in 1955, 1956 and 1957 Chevy Passenger Cars with V-8. These are the hoses for detail-oriented collectors and anyone seeking to restore the original factory look to their engine compartment. 044A, 55C-8260.

  • Price: $22.99

1957 CHEVY CORE SUPPORT PANELS - STAINLESS STEEL

1957 CHEVY CORE SUPPORT PANELS - STAINLESS STEEL

THESE ARE MADE FROM UN-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE PAIR. YOU ARE PURCHASING ONE SET -- ONE RIGHT SIDE AND ONE LEFT SIDE. Not Pre-Polished, but you can polish them yourself to a mirror like finish.

  • Price: $94.99
  • Sale Price: $59.99

1957 CHEVY CORE SUPPORT PANELS POLISHED S.S., LS, Griffin Cross

1957 CHEVY CORE SUPPORT PANELS POLISHED S.S., LS, Griffin Cross

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL. They are polished ONLY on one side. Fit beside the radiator and the inner fenders. These are for 1957 Chevy's with LS1, LS2 and early LS3 engines using Griffin Crossflow radiators ONLY!

  • Price: $129.99
  • Sale Price: $69.99

1957 CHEVY CORE SUPPORT PANELS POLISHED S.S., NO wire hole

1957 CHEVY CORE SUPPORT PANELS POLISHED S.S., NO wire hole

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL. They are polished ONLY on one side. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE PAIR. NOTE: THESE COME WITHOUT THE WIRE HOLE.

  • Price: $129.99
  • Sale Price: $89.99

1957 CHEVY CORE SUPPORT PANELS POLISHED S.S., WITH wire hole

1957 CHEVY CORE SUPPORT PANELS POLISHED S.S., WITH wire hole

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL. They are polished ONLY on one side.  Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE PAIR. NOTE: THESE COME WITH THE WIRE HOLE.

  • Price: $129.99
  • Sale Price: $89.99

1957 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

1957 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

YOU ARE PURCHASING ONE SET -- ONE RIGHT SIDE AND ONE LEFT SIDE. Made in the USA. Laser cut 16 gauge metal; fit very good and do have the hole that the factory ones have for the voltage regulator and horn relay. BUT, do not have the ribs.

  • Price: $84.95
  • Sale Price: $49.99

1957 CHEVY RADIATOR & GRILLE SUPPORT TO FENDER SHIM SET

1957 CHEVY RADIATOR & GRILLE SUPPORT TO FENDER SHIM SET

Stamped from mild steel, these are the shims that install between the upper radiator support bar and the fenders so you can adjust the gaps properly on your front end sheetmetal. will work on any 1957 classic Chevy model. You may also need the Radiator Core Support Rubber Cushions RA0006. 1169.

  • Price: $11.79

1957 CHEVY RADIATOR CORE SUPPORT WIRING GROMMET

1957 CHEVY RADIATOR CORE SUPPORT WIRING GROMMET

New.  This grommet installs in the driver side of the core support filler panel and the harness for the front Grille Bar lights mounts inside.  will work on all 1957 classic chevy models.  #357.

  • Price: $4.89

1957 Chevy Transmission Oil Cooler Lines, V8, Powerglide

1957 Chevy Transmission Oil Cooler Lines, V8, Powerglide

New Reproduction transmission oil cooler lines. Reproduced to original specifications with correct contours and dimensions. These are for 1957 Chevy Passenger cars with V8 running an original powerglide transmission. Cooler line clips included. Oversized shipping required. 1550, OCL003.

  • Price: $43.95
  • Sale Price: $35.99

Everco 4105, Transmission Oil Cooler

Everco 4105, Transmission Oil Cooler

Everco 4105 Transmission oil cooler, Intermediate Size Auto, 3/4" X 5" X 10.5", 10,500 GVW.

  • Price: $19.99