1955 Chevy Rear Wheel Well Extension, LH, exc. Wagon & Sedan Del

1955 Chevy Rear Wheel Well Extension, LH, exc. Wagon & Sedan Del

This is the wheel well extension that drops down from the rear of the wheel well.  Will fit the driver side of any 1955 classic Chevy passenger car model.  Will not fit wagons or sedan delivery.  D-2948, C-1060.

  • Price: $41.99
  • Sale Price: $36.99

1955 Chevy Rear Wheel Well Extension, RH, exc. Wagon & Sedan Del

1955 Chevy Rear Wheel Well Extension, RH, exc. Wagon & Sedan Del

This is the wheel well extension that drops down from the rear of the wheel well.  Will fit the passenger side of any 1955 classic Chevy passenger car model.  Will not fit wagons or sedan delivery.  D-2949, C-1061.

  • Price: $41.99
  • Sale Price: $36.99

1955-1956 Chevy 2-DR Bench Seat LOWER SEAT SHELL, LH

1955-1956 Chevy 2-DR Bench Seat LOWER SEAT SHELL, LH

New, LH (Drivers side), Lower Seat Shell for all 2 door 1955 and 1956 Chevy models of Sedans, Hardtops, Convertibles, Nomads and wagons with bench seats. Made just like the originals with the correct tack strip installed. a great quality part! MH218.

  • Price: $89.95
  • Sale Price: $69.99

1955-1956 Chevy 2-DR Bench Seat LOWER SEAT SHELL, RH

1955-1956 Chevy 2-DR Bench Seat LOWER SEAT SHELL, RH

New, RH (Passenger side), Lower Seat Shell for all 2 door 1955 and 1956 Chevy models of Sedans, Hardtops, Convertibles, Nomads and wagons with bench seats. Made just like the originals with the correct tack strip installed. a great quality part! MH219.

  • Price: $89.95
  • Sale Price: $69.99

1955-1956 Chevy Factory Accessory Floor Mats, Black, Pair

1955-1956 Chevy Factory Accessory Floor Mats, Black, Pair

New, One Pair. These are the original accessory items available from the factory in 1955 and 1956, with colors keyed to coordinate with the interiors. The bow tie detail is located at the center of each floor mat. Made in the USA. #1327

  • Price: $49.99

1955-1957 Chevy Convertible Drain Channel Reinforcement, LH

1955-1957 Chevy Convertible Drain Channel Reinforcement, LH

These drain channels and reinforcements are designed to channel away the water around, down and out of your convertible top before it can do damage. Will work on the drivers side of any 1955-1957 classic Chevy convertible. Made in the USA. c-7364, d-2591.

  • Price: $24.89
  • Sale Price: $21.99

1955-1957 Chevy Convertible Drain Channel Reinforcement, RH

1955-1957 Chevy Convertible Drain Channel Reinforcement, RH

These drain channels and reinforcements are designed to channel away the water around, down and out of your convertible top before it can do damage. Will work on the passenger side of any 1955-1957 classic Chevy convertible. Made in the USA. c-7365, d-2592.

  • Price: $24.89
  • Sale Price: $21.99

1955-1957 Chevy Convertible Drain Channel, Center

1955-1957 Chevy Convertible Drain Channel, Center

These drain channels are located behind the rear seat area, just below the rear pinchwell of your convertible.  Will work in the center of any 1955-1957 classic Chevy convertible.  Made in the USA. c-8988, d-10006.

  • Price: $159.89
  • Sale Price: $144.99

1955-1957 Chevy Convertible Drain Channel, LH

1955-1957 Chevy Convertible Drain Channel, LH

These drain channels are located behind the rear seat area, just below the rear pinchwell of your convertible.  Will work on the driver side of any 1955-1957 classic Chevy convertible.  Made in the USA. c-8987, d-10004.

  • Price: $98.89
  • Sale Price: $84.99

1955-1957 Chevy Convertible Drain Channel, RH

1955-1957 Chevy Convertible Drain Channel, RH

These drain channels are located behind the rear seat area, just below the rear pinchwell of your convertible.  Will work on the passenger side of any 1955-1957 classic Chevy convertible.  Made in the USA. c-8989, d-10005.

  • Price: $98.89
  • Sale Price: $84.99

1955-1957 Chevy Convertible Front Outer Wheel Well Section, LH

1955-1957 Chevy Convertible Front Outer Wheel Well Section, LH

This left hand 1955-1957 outer wheel well section connects the rocker to the middle of the wheel well. This wheel well is for the convertibles.  c-1066

  • Price: $87.99
  • Sale Price: $76.99

1955-1957 Chevy Convertible Front Outer Wheel Well Section, RH

1955-1957 Chevy Convertible Front Outer Wheel Well Section, RH

This Right hand 1955-1957 outer wheel well section connects the rocker to the middle of the wheel well. This wheel well is for the convertibles.  c-1067

  • Price: $87.99
  • Sale Price: $76.99

1955-1957 Chevy Convertible Rear Floor Seat Support, LH, each

1955-1957 Chevy Convertible Rear Floor Seat Support, LH, each

The rear floor seat supports are located just behind the rear floor pans. Will work on the driver side of any 1955-1957 classic Chevy convertible. Made in the USA. NOTE: both LH and RH shown in photo, but this listing is for the LH only. d-1788, c-9019.

  • Price: $64.89
  • Sale Price: $58.99

1955-1957 Chevy Convertible Rear Floor Seat Support, RH, each

1955-1957 Chevy Convertible Rear Floor Seat Support, RH, each

The rear floor seat supports are located just behind the rear floor pans. Will work on the driver side of any 1955-1957 classic Chevy convertible. Made in the USA. NOTE: both LH and RH shown in photo, but this listing is for the RH only. d-1789, c-9020.

  • Price: $64.89
  • Sale Price: $58.99

1955-1957 Chevy Floor Mats with Crest Logo, Blue

1955-1957 Chevy Floor Mats with Crest Logo, Blue

Your are purchasing One set of Blue Floor Mats. These custom mats, with original style ribbing, are fabricated in colors designed to match most Chevy applications. Crest is molded in and colored red, white, silver, gold, and blue. Set of four. #1323.

  • Price: $87.99

1955-1957 Chevy Front Floor at Cowl Brace, Driver Side, LH

1955-1957 Chevy Front Floor at Cowl Brace, Driver Side, LH

This is the floor brace that installs right under the front of the floor pan at the cowl, driver side, LH. It supports the front of the floor. D1379, C1056, EO592.

  • Price: $54.99
  • Sale Price: $39.99

1955-1957 Chevy Front Floor at Cowl Brace, Passenger Side, RH

1955-1957 Chevy Front Floor at Cowl Brace, Passenger Side, RH

This is the floor brace that installs right under the front of the floor pan at the cowl, passenger side, RH. It supports the front of the floor. D1380, C1057, EO591.

  • Price: $54.99
  • Sale Price: $39.99

1955-1957 Chevy Rear Body Mount Reinforcement, LH, Conv

1955-1957 Chevy Rear Body Mount Reinforcement, LH, Conv

This is the sheetmetal bodymount reinforcement that installs on the floorpan, rear, where the floorpan meets the trunk area. It measures 8.25" x 4.5"x 2.5". It adds strength to the rear floor where the body mount installs. Will fit the driver...

  • Price: $43.99
  • Sale Price: $39.99

1955-1957 Chevy Rear Body Mount Reinforcement, RH, Conv

1955-1957 Chevy Rear Body Mount Reinforcement, RH, Conv

This is the sheetmetal bodymount reinforcement that installs on the floorpan, rear, where the floorpan meets the trunk area. It measures 8.25" x 4.5"x 2.5". It adds strength to the rear floor where the body mount installs. Will fit the passenger...

  • Price: $43.99
  • Sale Price: $39.99

1955-1957 Chevy Rear Floor Pan, LH, excluding Convertibles

1955-1957 Chevy Rear Floor Pan, LH, excluding Convertibles

These are made to be easily welded in place, some modification may be necessary. will work on any 1955-1957 classic Chevy car, except convertible. Dimensions are 28" x 22". Oversized shipping required. Made in the USA. 238A, 1051.

  • Price: $79.99
  • Sale Price: $69.99

1955-1957 Chevy Rear Floor Reinforcement, HT & Conv., LH

1955-1957 Chevy Rear Floor Reinforcement, HT & Conv., LH

After replacing the rear floor sections, these panels are welded into position for added strength at the body-to-frame mount position. Adding these structural parts is an important step in the floor replacement operation. Dimensions are 10-3/8" x...

  • Price: $53.99
  • Sale Price: $48.99

1955-1957 Chevy Rear Floor Reinforcement, HT & Conv., RH

1955-1957 Chevy Rear Floor Reinforcement, HT & Conv., RH

After replacing the rear floor sections, these panels are welded into position for added strength at the body-to-frame mount position. Adding these structural parts is an important step in the floor replacement operation. Dimensions are 10-3/8" x...

  • Price: $53.99
  • Sale Price: $48.99

1955-1957 Chevy Rear Floor Seat Support, LH, Except Convertibles

1955-1957 Chevy Rear Floor Seat Support, LH, Except Convertibles

The rear floor seat supports are located just behind the rear floor pans.  Will work on the driver side of any 1955-1957 classic Chevy car except convertibles. Dimensions are 25-5/8" x 3-3/8" x 3". Made in the USA. LH. 1787, 13117.

  • Price: $58.89
  • Sale Price: $53.99

1955-1957 Chevy Rear Floor Seat Support, RH, Except Convertibles

1955-1957 Chevy Rear Floor Seat Support, RH, Except Convertibles

The rear floor seat supports are located just behind the rear floor pans. Will work on the passenger side of any 1955-1957 classic Chevy car except convertibles. Dimensions are 25-5/8" x 3-3/8" x 3". Made in the USA. RH. 1787A, 13118.

  • Price: $58.89
  • Sale Price: $53.99

1955-1957 CHEVY REAR SWAY BAR 7/8" HEAVY DUTY

1955-1957 CHEVY REAR SWAY BAR 7/8" HEAVY DUTY

Here is a Rear Anti-Sway Bar for your 1955, 1956 or 1957 Chevy Passenger Car. This is a heavy duty 7/8" bar for all models EXCEPT Wagons. 8.90

  • Price: $139.99

1955-1957 Chevy Short Rear Floor Brace, LH, Hardtop & Conv.

1955-1957 Chevy Short Rear Floor Brace, LH, Hardtop & Conv.

This is the short rear floor brace that installs in front of the rear seat floor supports. It measures 11" long and 5" wide and installs on the driver side of the floor pan. Will work on any 1955-57 classic Chevy hardtop or convertible. D-1384, C-1037, EO596.

  • Price: $24.99
  • Sale Price: $18.99

1955-1957 Chevy Short Rear Floor Brace, RH, Hardtop & Conv.

1955-1957 Chevy Short Rear Floor Brace, RH, Hardtop & Conv.

This is the short rear floor brace that installs in front of the rear seat floor supports. It measures 11" long and 5" wide and installs on the passenger side of the floor pan. Will work on any 1955-57 classic Chevy hardtop or convertible. D-1385, C-1038, EO597.

  • Price: $24.99
  • Sale Price: $18.99

1955-1957 Chevy Trunk Floor Rear 10" Section

1955-1957 Chevy Trunk Floor Rear 10" Section

This is the rear portion of the trunk, approximately 10" x 54" in size. Will work on any 1955-1957 classic Chevy car except wagons. Additional handling and oversized shipping required. 318B, 1068.

  • Price: $92.99
  • Sale Price: $82.99

1955-1957 Chevy Trunk Lid Latch Plate Cover, Upper

1955-1957 Chevy Trunk Lid Latch Plate Cover, Upper

New. Reproduction of Original. T runk latch plate cover for your 1955-1957 Chevy Car. Replace your missing or damaged cover today with this beautiful new part. Covers Trunk Latch Lower Edge On Deck Lid. 2907, G-195.

  • Price: $14.99
  • Sale Price: $11.99

1955-1957 Chevy Trunk Lid Latch Striker Plate, Lower

1955-1957 Chevy Trunk Lid Latch Striker Plate, Lower

As with the trunk latch assemblies, 50+ years of wear and tear can leave these important trunk latch plates functioning less than desired. Will work on any 1955-1957 classic Chevy sedan, hardtop or convertible. 2909, TS-567.

  • Price: $18.99
  • Sale Price: $14.99

1955-1957 Chevy Under Seat Floor Brace, Driver Side

1955-1957 Chevy Under Seat Floor Brace, Driver Side

This is the floor brace that supports the ends of the seat and the support the seat bolts to. It installs between the short floor brace, and the long front floor brace. Left hand side. Will work on all 1955-57 classic chevy models. 16117, D-16117, C-1053, EO594.

  • Price: $24.99
  • Sale Price: $18.99

1955-1957 Chevy Under Seat Floor Brace, Passenger Side

1955-1957 Chevy Under Seat Floor Brace, Passenger Side

This is the floor brace that supports the ends of the seat and the support the seat bolts to. It installs between the short floor brace, and the long front floor brace. Right hand side. Will work on all 1955-57 classic chevy models. 16118, D-16118, C-1054, EO593.

  • Price: $24.99
  • Sale Price: $18.99

1956 2DR Chevy Rear Fender, Lower Front Patch Panel, LH, Best

1956 2DR Chevy Rear Fender, Lower Front Patch Panel, LH, Best

The lower front portion of the rear fender is one of the most rust-prone parts of the car body. Will work on the driver side rear fender of any 1956 classic Chevy car, except 4-doors. Made in the USA. LH, 1375, 1108.

  • Price: $154.99
  • Sale Price: $119.98

1956 2DR Chevy Rear Fender, Lower Front Patch Panel, RH, Best

1956 2DR Chevy Rear Fender, Lower Front Patch Panel, RH, Best

The lower front portion of the rear fender is one of the most rust-prone parts of the car body. Will work on the passenger side rear fender of any 1956 classic Chevy car, except 4-doors. Made in the USA. RH, 1376, 1109.

  • Price: $154.99
  • Sale Price: $119.98

1956-1957 Chevy Rear Wheel Well Extension, RH, exc. Wgn, Sdn Del

1956-1957 Chevy Rear Wheel Well Extension, RH, exc. Wgn, Sdn Del

This is the wheel well extension that drops down from the rear of the wheel well.  Will fit the passenger side of any 1956 and 1957 classic Chevy passenger car model.  Will not fit wagons or sedan delivery.  D-2951, C-1059.

  • Price: $43.99
  • Sale Price: $39.99

1956-1957 Chevy Rocker Panel, Outer, LH, 4-DR Sedan & 4-DR Wgn

1956-1957 Chevy Rocker Panel, Outer, LH, 4-DR Sedan & 4-DR Wgn

Our rocker panels are factory reproductions featuring the same structural backside flanging found on the original parts. Will work on the driver side of any 1956 and 1957 classic Chevy 4-door sedan or 4-door wagon model. LH. 10124, 12015.

  • Price: $143.99
  • Sale Price: $129.99

1956-1957 Chevy Rocker Panel, Outer, RH, 4-DR Sedan & 4-DR Wgn

1956-1957 Chevy Rocker Panel, Outer, RH, 4-DR Sedan & 4-DR Wgn

Our rocker panels are factory reproductions featuring the same structural backside flanging found on the original parts. Will work on the passenger side of any 1956 and 1957 classic Chevy 4-door sedan or 4-door wagon model. RH. 10125, 12016.

  • Price: $143.99
  • Sale Price: $129.99

1957 CHEVY FENDER to INNER FENDER BRACE, one each

1957 CHEVY FENDER to INNER FENDER BRACE, one each

This is the brace that installs between the inner fender and the fender at the wheelwell.  Will work on any 1957 classic Chevy full size car model.  Two needed per car.  17688, MH116.

  • Price: $13.95
  • Sale Price: $12.50

1957 Chevy Front Filler Panel

1957 Chevy Front Filler Panel

This is the panel that installs under the bumper in the front between the fenders. It is often damaged by rocks and the occasional fender bender. If yours has seen better days replace it with this fine reproduction. Will work on any 1957 classic...

  • Price: $208.95
  • Sale Price: $179.95

1957 Chevy Inner Fender Support to Cowl Brackets

1957 Chevy Inner Fender Support to Cowl Brackets

These brackets attach to the lower cowl forward leg and secure the inner fender to the cowl leg.  These will work on any 1957 classic Chevy passenger car model.  Sold as a pair.  Made in the USA.  2072, MH108.

  • Price: $17.95
  • Sale Price: $14.99

1957 Chevy Outer Cowl Side Panel, Driver Side

1957 Chevy Outer Cowl Side Panel, Driver Side

This piece replaces cowl side panels in front of door hinge area on the Left hand side.  C14127, D12136.

  • Price: $97.99
  • Sale Price: $65.99

1957 Chevy Outer Cowl Side Panel, Passenger Side

1957 Chevy Outer Cowl Side Panel, Passenger Side

This piece replaces cowl side panels in front of door hinge area on the Right hand side.  C14128, D12137.

  • Price: $97.99
  • Sale Price: $65.99

THERMOMETER - "BUSTED KNUCKLE GARAGE"

THERMOMETER - "BUSTED KNUCKLE GARAGE"

New. Classic Tin Thermometer to hang on wall. measures 17" tall and 5" wide. #TH980

  • Price: $17.99
  • Sale Price: $14.99

THERMOMETER - "The Heartbeat of America"

THERMOMETER - "The Heartbeat of America"

New. Classic Tin Thermometer to hang on wall. measures 17" tall and 5" wide. #TH820

  • Price: $17.99
  • Sale Price: $14.99

THERMOMETER - "Genuine Chevrolet"

THERMOMETER - "Genuine Chevrolet"

New. Classic Tin Thermometer to hang on wall. measures 17" tall and 5" wide. #TH798

  • Price: $17.99
  • Sale Price: $14.99

SIGN - "Genuine Chevrolet" Round

SIGN - "Genuine Chevrolet" Round

New. 11 1/2" Round Tin Sign. #798

  • Price: $9.99

SIGN - "Heartbeat of America" Chevrolet

SIGN - "Heartbeat of America" Chevrolet

New. Tin Sign, measures 16" x 13". #820

  • Price: $11.99

SIGN - "1957 Bel Air 50th Anniversary"

SIGN - "1957 Bel Air 50th Anniversary"

New. Tin Sign, measures 16" x 13". #1395

  • Price: $11.99

SIGN - "1955 Crusin' Chevy Style"

SIGN - "1955 Crusin' Chevy Style"

New. Tin Sign, measures 16" x 13". #728

  • Price: $11.99

SIGN - "Chevy Racing Fans - Parking Only"

SIGN - "Chevy Racing Fans - Parking Only"

New. Tin Sign, measures 16" x 13". #1078

  • Price: $11.99

SIGN - "America - Let Freedom Ring"

SIGN - "America - Let Freedom Ring"

New. Tin Sign, measures 16" x 13". #1668

  • Price: $11.99

SIGN - "Busted Knuckle Garage"

SIGN - "Busted Knuckle Garage"

New. Tin Sign, measures 16" x 13". #980

  • Price: $11.99

CHROME GUN BARREL SHIFT KNOB with adapters

CHROME GUN BARREL SHIFT KNOB with adapters

New, "Universal" Chrome Gun Barrel Shift Knob.  comes with adapters to fit: 1/2" coarse - 13, 3/8" coarse - 16, 3/8" fine - 24, 5/16" coarse - 18.  Goes well with our new business "Oldedays Firearms"!  70228

  • Price: $41.99

1957 Chevy Car - A/C System, Inside Package, IP-7000

1957 Chevy Car - A/C System, Inside Package, IP-7000

Hurricane, Inside Package, w/ Deluxe Switching.  For all models of 1957 Chevy Full Size Cars.  Please see full description.  IP-7000.

  • Price: $599.99
  • Sale Price: $449.99

Browning Fixed Blade Knife DX-513

Browning Fixed Blade Knife DX-513

New.  Browning DX 513, 2.75" Fixed Blade 440A, Dura-Touch Handle in Mossy Oak Break Up. Black Nylon Sheath included.

  • Price: $24.95

Browning Fixed Blade Knife - Classic 322418, Stag Handle

Browning Fixed Blade Knife - Classic 322418, Stag Handle

New. Browning Classic 322418, Fixed 5CR15MOV Stainless Steel Blade with Etching with Buckmark. Handle has Stag inlay. Leather Sheath included.

  • Price: $39.95

Browning Fixed Blade Knife - Classic 322417, Wood Inlay Handle

Browning Fixed Blade Knife - Classic 322417, Wood Inlay Handle

New. Browning Classic 322417, Fixed 5CR15MOV Stainless Steel Blade with Etching with Buckmark. Handle has Wood inlay. Leather Sheath included.

  • Price: $29.95

Kershaw Fixed Blade Knife 1070CX

Kershaw Fixed Blade Knife 1070CX

New.  Kershaw 1070CX Echo Camo Fixed Blade.  Blade is 4" AUS8A stainless steel w/full tang.  Overall length is 8-5/8th".  Polyimide Handle with Real Tree Hordwoods HD.  Black Nylon Sheath included.

  • Price: $34.95

Browning Large Folding Knife, Skinner type - Escalade 322667

Browning Large Folding Knife, Skinner type - Escalade 322667

New.  Browning Large Folding knife. 3" 440C Stainless Steel blade with folding inner lock.  Handle is Box Elder Burl. Escalade 322667.

  • Price: $59.95

Browning Medium Folding Knife, Skinner type - Escalade 22668

Browning Medium Folding Knife, Skinner type - Escalade 22668

New.  Browning Medium Folding knife. 2.5" 440C Stainless Steel blade with folding inner lock.  Handle is Reddish Box Elder Burl. Escalade 22668.

  • Price: $49.95

RUGER - Pepper Spray - Pink Armor Case

RUGER - Pepper Spray - Pink Armor Case

New. Ruger-Tornado Pepper spray. Pink armor case. Thumb Trigger, Red Lock Tab, Sprays Up to 15 Feet, Key Chain, Belt Clip. 0.388 ounce. RPC093P. Must Read!: You must be 18+ in age. Sales only within the USA. NO SALES TO: DIST. of COLUMBIA,...

  • Price: $10.95

RUGER - Pepper Spray - Black Keychain

RUGER - Pepper Spray - Black Keychain

New. Ruger-Tornado Pepper spray. Black Vinyl Pouch Key Chain. Thumb Trigger, Red Lock Tab, Sprays Up to 15 Feet. 0.388 ounce. RKS091. Must Read!: You must be 18+ in age. Sales only within the USA. NO SALES TO: DIST. of COLUMBIA, HAWAII, ILLINOIS,...

  • Price: $9.95

RUGER - Pepper Spray - BLACK Lipstick Container

RUGER - Pepper Spray - BLACK Lipstick Container

New. Ruger-Tornado Pepper spray. Black "Lipstick" Type Container. Thumb Trigger, Sprays Up to 15 Feet. 0.529 ounce. RLS092. Must Read!: You must be 18+ in age. Sales only within the USA. NO SALES TO: DIST. of COLUMBIA, HAWAII, ILLINOIS,...

  • Price: $11.95

RUGER - Pepper Spray - RED Lipstick Container

RUGER - Pepper Spray - RED Lipstick Container

New. Ruger-Tornado Pepper spray. Red "Lipstick" Type Container. Thumb Trigger, Sprays Up to 15 Feet. 0.529 ounce. RLS092. Must Read!: You must be 18+ in age. Sales only within the USA. NO SALES TO: DIST. of COLUMBIA, HAWAII, ILLINOIS,...

  • Price: $11.95

RUGER - Pepper Spray - SILVER Lipstick Container

RUGER - Pepper Spray - SILVER Lipstick Container

New. Ruger-Tornado Pepper spray. Silver "Lipstick" Type Container. Thumb Trigger, Sprays Up to 15 Feet. 0.529 ounce. RLS092. Must Read!: You must be 18+ in age. Sales only within the USA. NO SALES TO: DIST. of COLUMBIA, HAWAII, ILLINOIS,...

  • Price: $11.95

RUGER - Pepper Spray - Pink Camo Keychain

RUGER - Pepper Spray - Pink Camo Keychain

New. Ruger-Tornado Pepper spray. Pink Camo Vinyl Pouch Key Chain. Thumb Trigger, Red Lock Tab, Sprays Up to 15 Feet. 0.388 ounce. RKS091P. Must Read!: You must be 18+ in age. Sales only within the USA. NO SALES TO: DIST. of COLUMBIA, HAWAII,...

  • Price: $9.95

1957 CHEVY Heater delete Plate- HAS BLEMISHES, STOCK HOLES

1957 CHEVY Heater delete Plate- HAS BLEMISHES, STOCK HOLES

New. THIS ITEM IS JUST LIKE OUR NORMAL ITEM, BUT DOES HAVE BLEMISH/SCTRATCH(ES) IN THE FINISH. SOLD AS IS ......These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white...

  • Price: $29.50
  • Sale Price: $20.00

1955-1957 Chevy Radiator Conversion Brackets, w/BLEMISHES pol ss

1955-1957 Chevy Radiator Conversion Brackets, w/BLEMISHES pol ss

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. Allows you to mount a 6 cylinder Radiator to a V-8 Core Support...

  • Price: $35.00
  • Sale Price: $25.00

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES w/BLEMISHES

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES w/BLEMISHES

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. New. Made out of pre-polished stainless steel and laser cut. Note: in photo of pair, they have the white protective coating. You are getting One Pair, one left and one right.

  • Price: $19.00
  • Sale Price: $15.00

1957 CHEVY HEATER VALVE PLATE - w/BLEMISHES, Pol. SS

1957 CHEVY HEATER VALVE PLATE - w/BLEMISHES, Pol. SS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH.  SOLD AS IS.  New. Made out of pre-polished stainless steel and laser cut. It is for covering the heater hot water valve hole when removed.

  • Price: $7.50
  • Sale Price: $5.00

1957 CHEVY Heater delete Plate w/BLEMISHES, Pol. SS, 1/4" HOLES

1957 CHEVY Heater delete Plate w/BLEMISHES, Pol. SS, 1/4" HOLES

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. New. These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white protective covering over the mirror finish....

  • Price: $29.50
  • Sale Price: $20.00

1957 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

1957 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE LEFT (DRIVERS) SIDE.

  • Price: $37.50
  • Sale Price: $25.00

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE LEFT (DRIVERS) SIDE.

  • Price: $37.50
  • Sale Price: $25.00

1957 Chevy Front Bumper Guard, LH (Drivers side), Blem as-is

1957 Chevy Front Bumper Guard, LH (Drivers side), Blem as-is

a very nice driver quality 1957 Chevy Front Bumper Guard, drivers side (LH).  just has a few blemishes in chrome and just a few small light swirl type scratches, hard to see.  AS-IS.

  • Price: $85.00
  • Sale Price: $39.99

1956 CHEVY FRONT BUMPER GUARD, Passenger Side, AS-IS

1956 CHEVY FRONT BUMPER GUARD, Passenger Side,  AS-IS

THESE WILL HAVE MINOR BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed FRONT Bumper Guard, Passenger Side (RH). fits 1956 Chevy passenger cars, ALL models.

  • Price: $39.95
  • Sale Price: $25.00

1957 CHEVY Heater delete Plate- HAS BLEMISHES, NO HOLES

1957 CHEVY Heater delete Plate- HAS BLEMISHES, NO HOLES

New. THIS ITEM IS JUST LIKE OUR NORMAL ITEM, BUT DOES HAVE BLEMISH/SCTRATCH(ES) IN THE FINISH. SOLD AS IS ......These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white...

  • Price: $29.50
  • Sale Price: $20.00

1955-1957 CHEVY 605 STEERING BOX COVER, As-Is Blemishes

1955-1957 CHEVY 605 STEERING BOX COVER,  As-Is Blemishes

***AS IS - Has scratches/blemishes in finish.*** This Cover is New and laser cut from Polished Stainless Steel. They are made to cover the 605 Steering Boxes in 1955, 1956 and 1957 Chevy Passenger Cars. And is the perfect way to help dress up a bland engine compartment. Made in USA.

  • Price: $29.50
  • Sale Price: $17.50

1955-1957 CHEVY ELECTRIC WIPER MOTOR COVER, AS-IS Blems

1955-1957 CHEVY ELECTRIC WIPER MOTOR COVER, AS-IS Blems

AS-IS. Has scratches/blemishes in finish. cover made from Polished stainless steel. These wiper motor covers are designed to fit over the original electric wiper motor and are the perfect way to help dress up a bland engine compartment.

  • Price: $35.50
  • Sale Price: $22.50

1955-1956 CHEVY CORE SUPPORT PANELS POLISHED SS. AS-IS

1955-1956 CHEVY CORE SUPPORT PANELS POLISHED SS.  AS-IS

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Fit beside the radiator and the inner fenders. One Pair, One left and one right. AS-IS.

  • Price: $75.00
  • Sale Price: $50.00

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE LEFT (Driver) SIDE. DOES NOT HAVE HORN WIRE HOLE.

  • Price: $37.50
  • Sale Price: $25.00

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, RH

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, RH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE RIGHT (PASSENGER) SIDE.

  • Price: $37.50
  • Sale Price: $25.00

1955 Chevy Radiator Core Support Upper Tie Bar, Pol. SS, AS-IS

1955 Chevy Radiator Core Support Upper Tie Bar, Pol. SS, AS-IS

The upper radiator support bar can get pretty beaten up over the years. Replace yours with this new Polished Stainless steel reproduction. This is a nice, new reproduction. NEW, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS.

  • Price: $199.95
  • Sale Price: $149.95

1955-1957 CHEVY WIPER BLOCK OFF - BOW TIE - POL. S.S.- BLEMISHED

1955-1957 CHEVY WIPER BLOCK OFF - BOW TIE - POL. S.S.- BLEMISHED

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. Pre-polished stainless steel, 18 gauge. Wiper Block off plate to be used when you remove the stock wiper motor and either install an after market Wiper unit or go without.

  • Price: $17.99
  • Sale Price: $12.99

1955-1957 CHEVY OUTSIDE DOOR MIRROR - Blemishes, AS-IS

1955-1957 CHEVY OUTSIDE DOOR MIRROR - Blemishes, AS-IS

AS-IS, this item has a couple of small blemished in the mirror finish. New. Nice reproduction. This price is for ONE mirror.  C5501.  AS_IS

  • Price: $20.00

1955 Chevy Bel Air, Front Fender Molding, Drivers Side, AS-IS

1955 Chevy Bel Air, Front Fender Molding, Drivers Side, AS-IS

AS-IS item, have small scratches or defects in product, These mouldings have been duplicated according to original specifications including the rolled backside flanging. Install on the driver side front fender of all 1955 classic Chevy 2 and 4-door Bel Air models, except for the Nomad. BP280

  • Price: $57.95