Oldedays Classic Car Parts

All GM 10-12 bolt rear disc brake brackets set. New, never installed. Made in the USA. Comes with hardware and instructions for the items to use.

Use with 1980-1985 Cadillac Seville rear callipers and 1979 Trans Am rear rotors.

This kit comes with the bracket to firewall,7" Dual Diaphragm booster, the master cylinder and proportioning valve. Instructions included. All new parts, made in the USA. we have for both the Disc/Drum (60/40) and for the Disc/Disc (50/50). let us know which one you want.

1955, 1956, 1957, CHEVROLET REAR LOWER SHOCK U-BOLT PLATES BELOW THE REAR SPRINGS. NEW MILD STEEL. AND THE U-BOLTS FOR FORD 9" REAR ENDS (7/16"), AS YOU SHOULD REPLACE THEM ALSO.

1955, 1956, 1957, CHEVROLET REAR LOWER SHOCK U-BOLT PLATES BELOW THE REAR SPRINGS. NEW MILD STEEL. AND THE U-BOLTS, AS YOU SHOULD REPLACE THEM ALSO.

1955, 1956, 1957, CHEVROLET REAR U-BOLTS WITH NUTS.

Classic Drop Spindles for the Tri-5's. These are made in the USA and are the best ones made today. We also have the rotor kit with all the hardware for sale, check them out.

New - Front and Rear brake hoses. Total (3) 2 front; 1 rear. Fits 1955-1964 passenger car Chevrolet. May fit others also.

This Sway Bar Bracket fits the Tubular A Arms we sell. You will need to drill 1 hole each side. Easy to install and works good. We also sell Sway Bars.

New pad for the passenger car except power brake. You are purchasing ONE each pad.

NEW. This is what you need for the 2" drop spindles. These are all new parts. 10 1/2" Rotors. Made in the USA. Comes with hardware to bolt in or you can weld them in.

NEW. This is what you need for the STOCK SPINDLES. These are all new parts. 11" rotors. Made in the USA. Comes with hardware to bolt in.

Pair, made of polished stainless steel, 18 gauge. The white one in the picture shows the protective cover on them to protect the mirror finish.

This kit comes with the bracket to firewall, booster, the master cylinder and proportioning valve. Instuctions included. All new parts, made in the USA.

New, Danchuk #321.

New 5 leaf rear springs. Made in the USA. 55-56-57 Chevy Passenger cars.

To mount the UPPER shock to instead of using the floor. NOT for NOMADS or Station Wagons. NOTE: These are now Powder Coated, Black Semi Gloss, Looks great.

Rear lower shock u-bolt plates below the rear springs. New mild steel.

All new setup, works great. Adjustable, no welding, grade 8 bolts and mild steel. Made in the USA.

New. These are the best traction bars made today in the USA. Just bolt on and go.

New. Front Disc Brake Brackets. MADE IN USA. Very nice setup. Comes with hardware and instructions for the items to use. We also have the other items you will need. You will need to use: eleven inch rotors from 1969 - 1972 Chevelle. Calipers from 1979 - 1985 Monte Carlo.

Fits 1955-1960. New item, never been installed. Made in the USA. Very nice set-up. Comes with hardware and instructions for the items to use.

Bolt on rear disc brake kit for Chevy 1955-1964 rear ends. 11" rotors. uses GM cast iron calipers w/e-brake built in. Comes with laser cut brackets, brake hoses, new calipers w/pads, hardware and e-brake cables.

Moving the springs from outside the frame to underneath the frame, will allow you to run 10" wide wheels without having to narrow the frame or rear-end. We also have the Shock Crossmember as well.

Brand New. Mike McGaughy Classic Chevy Parts. 1958-64 2" drop spindles. These have the disc brake brackets built on them. We sell the disc brake rotor kit for these. We also sell the power brake booster and proportioning valve.

New, never installed. Made in the USA. Very nice set-up. Comes with hardware and instructions for the items to use.

Brand New. Calipers, pads, hoses, dust caps, wheel bearings, seals, rotors and the disc brake brackets. We also have power brake units for sale.

Fits 1965-1968 Impala Front. New item, never been installed. Made in the USA. Very nice set-up. Comes with hardware and instructions for the items to use.

Brand New. Mike McGaughy Classic Chevy Parts. 1965-70 FULL SIZE CHEVY PASSENGER CAR 2" drop spindles. These have the disc brake brackets built on them.

FITS CHEVROLET CHEVY Blazer, Suburban, and 10/12 bolt Pickup rear ends. New. MADE IN USA. Very nice setup. Comes with hardware and instructions for the items to use.

This kit comes with the bracket to mount it any where you want. Electic pump with instructions.

This kit comes with the bracket to mount it any where you want. Electic pump with instructions

FITS FORD 8" OR 9", REAR DISC BRAKE SET UP that have the same Backing Plate Spacer measurements as in our photo. the Bolt Holes are for 3/8" bolts.

FITS ALL FORD 9" BIG BEARING (NOT NEW BEARING)REAR DISC BRAKE SET UP. BIG WHEEL BEARING. PLEASE NOTE MEASUREMENTS OF THE BACKING PLATE SPACER IN PHOTO. THE BOLT HOLES ARE FOR 1/2" BOLTS.

REAR U-BOLTS FOR A FORD 9" REAR END, WITH NUTS AND FLAT WASHERS. NEW. 7/16"FINE THREAD.

FITS ALL FORD 9" REAR DISC BRAKE SET UP. SMALL WHEEL BEARING. PLEASE NOTE MEASUREMENTS OF THE BACKING PLATE SPACER IN PHOTO. BOLT HOLES ARE FOR 3/8" BOLTS. IF UNSURE PLEASE CALL BEFORE ORDERING.

Comes with upper and lower ball joints, bushings, rubber bumpers, both outer tie rod ends. The bushings are rubber. The mounting bolts for the ball joints and grease fittings are included.