1939-1957 CHEVY SHIFT LEVER RUBBER BUSHING w/ METAL SLEEVE

1939-1957 CHEVY SHIFT LEVER RUBBER BUSHING w/ METAL SLEEVE

New. One each Shift rod grommet. comes with the metal lining. Fits 1939 to 1957 Chevy full size passenger cars. also fits 1947 to 1966 Chevy/GMC Trucks. Automatic columns require one, manual columns require two. 1178. 47-7227.

  • Price: $4.99
  • Sale Price: $4.49

1949-1954 CHEVY SIDE MOTOR MOUNT KIT

1949-1954 CHEVY SIDE MOTOR MOUNT KIT

A pair of side motor mount Brackets for 1949 to 1954 Chevy passenger cars to mount V-8 engines. SBC or BBC. Will not work with stock steering. you must change to a mustang II front end. Comes with Hardware and motor rubber mounts.

  • Price: $127.99
  • Sale Price: $99.99

1955-1957 Chevy Radiator Conversion Bracket -Pol. ss, w/hardware

1955-1957 Chevy Radiator Conversion Bracket -Pol. ss, w/hardware

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. These brackets will allow you to mount your V-8 radiator into the 6-cylinder position using your V-8 core support. comes w/ hardware.

  • Price: $75.99
  • Sale Price: $65.99

1957 Chevy Cowl / Firewall-to-Hood Seal Clip Set

1957 Chevy Cowl / Firewall-to-Hood Seal Clip Set

New.  These are for use with the firewall to hood seal.  Why spend the time to clean up the old hardware? 605. 20-157, 3.06*.

  • Price: $3.99
  • Sale Price: $2.99

1957 Chevy Radiator Core Upper Support Bar

1957 Chevy Radiator Core Upper Support Bar

The radiator core support upper bar makes sure that your front end sheetmetal lines up. If it is bent or damaged it can be almost impossible to get things in line. If your's looks like it has seen better days replace it with this quality part....

  • Price: $87.99
  • Sale Price: $82.99

1955 CHEVY HOOD SPRINGS, Pair, also fits 55-57 chevy pu's

1955 CHEVY HOOD SPRINGS, Pair, also fits 55-57 chevy pu's

New, One Pair.  Springs are painted black to give you that showroom fresh look. Best purchased in pairs for even spring tension. Fits all 1955 Chevy passenger car models.  Also fits 1955-1957 Chevy Pickup trucks.  475x2, EO736.

  • Price: $23.99
  • Sale Price: $19.99

1955 Chevy Silver Cad Plated Hood Springs, Pair

1955 Chevy Silver Cad Plated Hood Springs, Pair

One Pair of Silver Cad Plated Hood Springs.  Will work on any 1955 classic Chevy model. One Pair.

  • Price: $39.99
  • Sale Price: $21.99

1955-1956 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

1955-1956 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

Made in the USA. Laser cut 16 gauge metal; fit very good and do NOT have all the holes that the factory ones have for the voltage regulator and horn relay. Also do NOT have the ribs. YOU ARE PURCHASING ONE SET -- ONE RIGHT SIDE AND ONE LEFT SIDE.

  • Price: $94.95
  • Sale Price: $49.99

1955-1956 Chevy Hood Hinge Hardware Kit - Stainless Steel

1955-1956 Chevy Hood Hinge Hardware Kit - Stainless Steel

1955-1956 Chevy Hood Hinge Hardware Kit - Stainless Steel. Replace your worn out, rusty old hardware with these new stainless steel set. We also have the Hood Hinges as well.  2881.

  • Price: $15.95
  • Sale Price: $11.99

1955-1957 CHEVY 605 STEERING BOX COVER, POLISHED S.S.

1955-1957 CHEVY 605 STEERING BOX COVER, POLISHED S.S.

This Cover is New and laser cut from Polished Stainless Steel. They are made to cover the 605 Steering Boxes in 1955, 1956 and 1957 Chevy Passenger Cars. And is the perfect way to help dress up a bland engine compartment. Made in USA.

  • Price: $57.95
  • Sale Price: $47.99

1955-1957 Chevy A-Arm Washer, Lower, Curved, each

1955-1957 Chevy A-Arm Washer, Lower, Curved, each

New, One each. 1955-1957 Chevy A-Arm Washer, Lower, Curved, Bushing.  12710.

  • Price: $1.49
  • Sale Price: $0.79

1955-1957 Chevy A-Arm Washer, Upper, Curved, each

1955-1957 Chevy A-Arm Washer, Upper, Curved, each

New, One each. 1955-1957 Chevy A-Arm Washer, Upper, Curved.  12709.

  • Price: $1.49
  • Sale Price: $0.79

1955-1957 CHEVY ELECTRIC WIPER MOTOR COVER, Polished SS

1955-1957 CHEVY ELECTRIC WIPER MOTOR COVER, Polished SS

One each cover with mounting hardware. cover made from Polished stainless steel. These wiper motor covers are designed to fit over the original electric wiper motor and are the perfect way to help dress up a bland engine compartment. Made in USA

  • Price: $68.95
  • Sale Price: $34.99

1955-1957 Chevy Hood Latch Plate

1955-1957 Chevy Hood Latch Plate

You can only straighten a part so many times! This sturdy steel plate is reproduced to original specifications, and as straight as they come.  1150, EO244.

  • Price: $9.95
  • Sale Price: $8.99

1955-1957 Chevy Hood Latch Plate, CHROME

1955-1957 Chevy Hood Latch Plate, CHROME

Chrome hood latch plate for your 55-57 Chevy. Great time to replace your missing or damaged plate. This sturdy chrome plate is made to original specifications, and as straight as they come. Great looking part, will look nice under your hood. MH350C.

  • Price: $27.95
  • Sale Price: $24.99

1955-1957 CHEVY PRESSURE HOSE FOR 605 STEERING BOX & BBC

1955-1957 CHEVY PRESSURE HOSE FOR 605 STEERING BOX & BBC

YOU ARE PURCHASING ONE (1) PRESSURE HOSE.... FOR A 1955, 1956 OR 1957 CHEVROLET PASSENGER CAR WITH A 605 STEERING BOX.... FOR BIG BLOCK CHEVY POWER STEERING CONVERSION.... O-RING STYLE....PSH006

  • Price: $37.95
  • Sale Price: $24.99

1955-1957 Chevy Radiator Support Wire Harness Clip, each

1955-1957 Chevy Radiator Support Wire Harness Clip, each

New. This radiator support wire harness clip installs on the radiator crossbar to support the wiring harness. Will work on any 1955-1957 classic Chevy Full Size Car. 3 to 6 clips needed per car. One each. 12333. 20-183D

  • Price: $0.79
  • Sale Price: $0.49

1955-1957 CHEVY STOCK STEERING BOX COVER, POLISHED S.S.

1955-1957 CHEVY STOCK STEERING BOX COVER, POLISHED S.S.

This Cover is New and laser cut from Polished Stainless Steel. They are made to cover the STOCK Steering Boxes in 1955, 1956 and 1957 Chevy Passenger Cars. And is the perfect way to help dress up a bland engine compartment. Made in USA.

  • Price: $47.95
  • Sale Price: $39.99

1955-1957 CHEVY WIPER BLOCK OFF - BOW TIE - POLISHED S.S.

1955-1957 CHEVY WIPER BLOCK OFF - BOW TIE - POLISHED S.S.

Pre-polished stainless steel, 18 gauge. Wiper Block off plate to be used when you install Raingear Wiper units, which we sell. Picture of front side has the protective cover/coating still on it, but remove it and reveal the mirror like finish. The other photo is of the back side.

  • Price: $23.99
  • Sale Price: $21.99

1955-1957 CHEVY WIPER BLOCK OFF POL. S/S

1955-1957 CHEVY WIPER BLOCK OFF POL. S/S

Pre-polished stainless steel, 18 gauge. Block off plate to be used when you install aftermarket Wiper units or remove your wiper motor. Picture looks like it is dull grey but it has a mirror like finish. See the other picture with a camera reflection to show the finish better.

  • Price: $21.95
  • Sale Price: $15.99

1956 Chevy Hood Latch Assembly, New Reproduction

1956 Chevy Hood Latch Assembly, New Reproduction

Tired of looking at that old worn out hood latch. Now you can replace it with a brand new reproduction of the original part, cad plated and ready to install. Will work on any 1956 classic Chevy Passenger Car model (150, 210, Bel Air, Wagons, Nomads). 15896, HO13-56L.

  • Price: $88.95
  • Sale Price: $79.99

1957 CHEVY BATTERY TRAY - BOX

1957 CHEVY BATTERY TRAY - BOX

NEW, battery tray/box assembly for 1957 Chevy Nomad, Belair, Wagon, 150, and 210 cars. This sturdy reproduction is powder coated in a durable black finish and designed to endure many years of wear and tear. 313

  • Price: $28.95
  • Sale Price: $22.99

1957 CHEVY CORE SUPPORT PANELS - STAINLESS STEEL

1957 CHEVY CORE SUPPORT PANELS - STAINLESS STEEL

THESE ARE MADE FROM UN-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE PAIR.

  • Price: $94.99
  • Sale Price: $59.99

1957 CHEVY CORE SUPPORT PANELS POLISHED STAINLESS STEEL

1957 CHEVY CORE SUPPORT PANELS POLISHED STAINLESS STEEL

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL. They are polished ONLY on one side.  Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE PAIR. LET US KNOW IF YOU WANT WITH OR WITHOUT HORN WIRE HOLE.

  • Price: $129.99
  • Sale Price: $99.99

1957 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

1957 CHEVY CORE SUPPORT PANELS STEEL RIGHT/LEFT - NEW

YOU ARE PURCHASING ONE SET -- ONE RIGHT SIDE AND ONE LEFT SIDE. Made in the USA. Laser cut 16 gauge metal; fit very good and do have the hole that the factory ones have for the voltage regulator and horn relay. BUT, do not have the ribs.

  • Price: $84.95
  • Sale Price: $49.99

1957 CHEVY COWL BRACE COVER - Polished Stainless Steel

1957 CHEVY COWL BRACE COVER - Polished Stainless Steel

New. These are made from pre-polished stainless and laser cut.  It attaches to the upper driver side of the firewall and is a very nice item to dress up your car. 10562*

  • Price: $9.95
  • Sale Price: $6.99

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES - Plain Steel

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES - Plain Steel

New. Made out of plain steel (paintable) and laser cut.  You are getting One Pair, one left and one right.

  • Price: $24.99
  • Sale Price: $19.99

1957 Chevy Front Filler Panel

1957 Chevy Front Filler Panel

This is the panel that installs under the bumper in the front between the fenders. It is often damaged by rocks and the occasional fender bender. If yours has seen better days replace it with this fine reproduction. Will work on any 1957 classic...

  • Price: $208.95
  • Sale Price: $179.95

1957 CHEVY GRILLE BAR & HOOD LATCH SUPPORT BRACKETS - S.S.

1957 CHEVY GRILLE BAR & HOOD LATCH SUPPORT BRACKETS - S.S.

This set has the two Grille Bar support brackets as well as the Hood Latch Support Bracket. All is made from Stainless Steel. Nice stuff!  Made in the USA.

  • Price: $54.99
  • Sale Price: $39.95

1957 CHEVY GRILLE BAR SUPPORT BRACKETS - Stainless Steel, Pair.

1957 CHEVY GRILLE BAR SUPPORT BRACKETS - Stainless Steel, Pair.

New.  This set has the two Grille Bar support brackets. All is made from Stainless Steel. Proudly Made in the USA!!!  Nice stuff!

  • Price: $29.99
  • Sale Price: $19.99

1957 CHEVY Heater delete Plate POLISHED STAINLESS, 1/4" HOLES

1957 CHEVY Heater delete Plate POLISHED STAINLESS, 1/4" HOLES

New. These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white protective covering over the mirror finish. NOTE: you will need to remove the protective white coating. THIS...

  • Price: $54.99
  • Sale Price: $39.99

1957 CHEVY Heater delete Plate POLISHED STAINLESS, NO HOLES

1957 CHEVY Heater delete Plate POLISHED STAINLESS, NO HOLES

New. These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white protective covering over the mirror finish. NOTE: you will need to remove the protective white coating. THIS IS THE SOLID PLATE WITH: **NO HOLES**

  • Price: $54.99
  • Sale Price: $39.99

1957 CHEVY HEATER HOSE KIT w/ Original Ribs, 8 CYLINDER

1957 CHEVY HEATER HOSE KIT w/ Original Ribs, 8 CYLINDER

New.  1957 Chevy Passenger cars, 8 cyl. with standard or deluxe heater. Non-A/C. Reproduction of origianls with ribs on hose. Includes original style hose clamps. 11239, OHK001

  • Price: $36.95
  • Sale Price: $29.99

1957 CHEVY HEATER HOSE KIT, 8 CYLINDER

1957 CHEVY HEATER HOSE KIT, 8 CYLINDER

New.  1957 Chevy Passenger cars, 8 cyl. with standard or deluxe heater. Non-A/C. Reproduction with GM square stamped on hose. Includes original style hose clamps. HHK001

  • Price: $28.99
  • Sale Price: $23.99

1957 Chevy Hood Hinge Hardware Kit - Plated

1957 Chevy Hood Hinge Hardware Kit - Plated

This 10 piece (plus washers) cad plated hardware kit has all the fasteners you need to install the hood hinges on your classic.  Will work on any 1957 classic Chevy.  2880.

  • Price: $14.95
  • Sale Price: $8.95

1957 Chevy Hood Hinge Hardware Kit - Stainless Steel

1957 Chevy Hood Hinge Hardware Kit - Stainless Steel

1957 Chevy Hood Hinge Hardware Kit - Stainless Steel. Replace your worn out and rusty old set with these new stainless steel set. We also have the hood hinges and springs. 2879.

  • Price: $17.95
  • Sale Price: $13.99

1957 CHEVY HOOD HINGES - (Pair)- New

1957 CHEVY HOOD HINGES - (Pair)- New

New Reproduction Steel Hood Hinges (you are purchasing one pair). Replace those worn and loose hinges on your 1957 Chevy with these Nice and New ones. We also have the Hood Springs and Hardware kit as well if you need them let us know. 12223, BPC-129.

  • Price: $163.99
  • Sale Price: $149.99

1957 Chevy Hood Latch Assembly, New Reproduction

1957 Chevy Hood Latch Assembly, New Reproduction

Tired of looking at that old worn out hood latch. Now you can replace it with a brand new reproduction of the original part, cad plated and ready to install. Will work on any 1957 classic Chevy Passenger Car model (150, 210, Bel Air, Wagons, Nomads). 15897, HO13-57L, HOL-57, 54-207.

  • Price: $99.95
  • Sale Price: $84.99

1957 CHEVY HOOD LATCH SUPPORT BRACKET - S.S.

1957 CHEVY HOOD LATCH SUPPORT BRACKET - S.S.

New. One Hood Latch Support Bracket. Made from Stainless Steel. Proudly Made in the USA!!!  Nice stuff!

  • Price: $29.99
  • Sale Price: $19.99

1957 Chevy Transmission Oil Cooler Lines, V8, Powerglide

1957 Chevy Transmission Oil Cooler Lines, V8, Powerglide

New Reproduction transmission oil cooler lines. Reproduced to original specifications with correct contours and dimensions. These are for 1957 Chevy Passenger cars with V8 running an original powerglide transmission. Cooler line clips included. Oversized shipping required. 1550, OCL003.

  • Price: $43.95
  • Sale Price: $35.99

CHEVY SHIFT LINKAGE ADJUSTABLE SWIVEL NUT W/BUSHING

CHEVY SHIFT LINKAGE ADJUSTABLE SWIVEL NUT W/BUSHING

This is both the Shift Linkage adjustable swivel nut AND the shift column lever linkage bushing. Automatic Transmissions require 1, manual transmissions require 2. This item goes with our Shift Rod Turbo Trans.

  • Price: $18.99
  • Sale Price: $14.99

CHROME CRANKSHAFT PULLEY, Double Groove, SBC, SWP

CHROME CRANKSHAFT PULLEY, Double Groove, SBC, SWP

New, Chrome Double Groove Crankshaft Pulley.  Fits Small Block Chevy with short water pump. Trans-Dapt 9603.

  • Price: $22.89
  • Sale Price: $19.99

CHROME WATER PUMP PULLEY, Dbl Groove, Trans-Dapt 9601

CHROME WATER PUMP PULLEY, Dbl Groove, Trans-Dapt 9601

New, Chrome Double Groove Water Pump Pulley.  Small Block Chevys with Short Water pumps. 6-3/8" diam.  Trans-Dapt 9601.

  • Price: $21.89
  • Sale Price: $18.99

IGNITION WIRE SUPPORT LOOMS - Polished Stainless steel

IGNITION WIRE SUPPORT LOOMS - Polished Stainless steel

New. These are made from pre-polished stainless and laser cut, very nice items to dress up your car.  Set of 4 - 2 four wire supports (large) and 2 two wire supports (small)

  • Price: $9.95
  • Sale Price: $5.99

LS1 - EMISSIONS BLOCK OFF PLATES AND COVERS - SET

LS1 - EMISSIONS BLOCK OFF PLATES AND COVERS - SET

New. These are made from stainless and pre-polished stainless steel and laser cut, very nice items to dress up your car. You are getting two different block off plates and three different covers.

  • Price: $16.95
  • Sale Price: $12.99

POWER STEERING PULLEY, Single Groove, Chrome, keyway, GM/Chevy

POWER STEERING PULLEY, Single Groove, Chrome, keyway, GM/Chevy

New, Chrome Single Groove Power Steering Pulley.  Fits Early GM & Chevy Power Steering pumps (67-84) with 5/8" Keyway. Trans-Dapt 6913.

  • Price: $24.99
  • Sale Price: $21.99

PROPORTIONING VALVE HOLDER - Stainless steel

PROPORTIONING VALVE HOLDER - Stainless steel

New. These are made from stainless steel and laser cut, very nice. Holds Brass and SSBC Proportioning valves.

  • Price: $6.95
  • Sale Price: $3.99