1955-1957 Chevy 500 Series Power Steering Box, New, 14:1 Ratio

1955-1957 Chevy 500 Series Power Steering Box, New, 14:1 Ratio

Designed around Delphis 670 Series power steering box, the 500 series offers you better reliability, response, road feel and quicker steering response than older 605 boxes.  13197.  THIS IS DROP SHIP ITEM.

  • Price: $438.99

1955-1957 CHEVY SHORTENED STOCK COLUMN FIREWALL BRACKET

1955-1957 CHEVY SHORTENED STOCK COLUMN FIREWALL BRACKET

New.  This is used when you have shortened your stock steering column for a 605/500 series steering box.  it welds to column and bolts to existing holes in firewall from the inside.

  • Price: $14.99
  • Sale Price: $6.99

1955-1957 Chevy Stock Column Modification Bushing, 3/4 inch ID.

1955-1957 Chevy Stock Column Modification Bushing, 3/4 inch ID.

This is the Sleeve/Bushing we use when modifing a stock 1955-1957 Chevy Steering Column to go to our Rack and Pinion Set-up.  it has a 3/4 inch interior diameter. 

  • Price: $19.99

1955-1957 CHEVY 605 500 POWER STEERING HOSE KIT

1955-1957 CHEVY 605 500 POWER STEERING HOSE KIT

Hose kit needed when you install the 605 or 500 series power steering units: One pressure hose and one return line hose. Comes with brass fitting for either inverted or verted fittings. If you have a power steering unit with o-rings we have the brass adapters you will need as well.

  • Price: $44.99

1955-1957 Chevy DELUXE FRONT END REBUILD KIT, RUBBER

1955-1957 Chevy DELUXE FRONT END REBUILD KIT, RUBBER

Upper & lower ball joints, bushings, rubber bumpers, both outer tie rod ends. The bushings are rubber. Pair of Inner Tie Rods & adj. sleeves, and the front end fastener kit.

  • Price: $279.99

1955-1957 CHEVY FRONT END REBUILD KIT w/POWER STEERING

1955-1957 CHEVY FRONT END REBUILD KIT w/POWER STEERING

For Power Steering. Comes with 2 upper and 2 lower ball joints, 4 Lower Control Arm Bushings, 4 Upper Control Arm Bushings, 2 Tie Rod Adjusting Sleeves, 2 Outer Tie Rods. The bushings are rubber. #BSK5557P

  • Price: $197.95

1955-1957 CHEVY FRONT END REBUILD KIT, MANUAL STEERING

1955-1957 CHEVY FRONT END REBUILD KIT, MANUAL STEERING

For Manual Steering. Comes with 2 upper and 2 lower ball joints, 4 Lower Control Arm Bushings, 4 Upper Control Arm Bushings, 2 Tie Rod Adjusting Sleeves, 2 Outer Tie Rods, 2 Inner Tie Rods. The bushings are rubber. #BSK5557

  • Price: $214.95

1955-1957 Chevy FRONT END REBUILD KIT, RUBBER

1955-1957 Chevy FRONT END REBUILD KIT, RUBBER

Comes with upper and lower ball joints, upper and lower A-Arm bushings, upper and lower rubber bumpers, and a pair of outer tie rod ends. The bushings are rubber. The mounting bolts for the ball joints and grease fittings are included. RR-CHE551+2XEO743+2XEO744.

  • Price: $169.99

1955-1957 Chevy Idler Arm Bearing Kit

1955-1957 Chevy Idler Arm Bearing Kit

Long time nicknamed the Poor Mans Power Steering, these kits include everything needed to bring smoothness and ease to your steering, second only to an expensive power conversion. This kit is by far one of the most inexpensive yet major...

  • Price: $107.95

1955-1957 Chevy Idler Arm Bushing

1955-1957 Chevy Idler Arm Bushing

Will work on any 1955-1957 classic Chevy model.  Installs on the steering center link end of the idler arm.  1 required per car. #058.

  • Price: $12.95

1955-1957 Chevy Idler Arm Support Bushing

1955-1957 Chevy Idler Arm Support Bushing

Will work on any 1955-1957 classic Chevy model.  Installs on the support end o the idler arm at the frame.  1 required per car.  #059.

  • Price: $12.95

1955-1957 CHEVY OUTER TIE ROD ENDS (One Pair)

1955-1957 CHEVY OUTER TIE ROD ENDS (One Pair)

This is what we use in our Rack and Pinion complete units. also can be used on stock units.  Fits 1955, 1956 and 1957 Chevrolet passenger cars, all models.

  • Price: $44.99

1955-1957 CHEVY P/S HOSE KIT FOR OUR RACK & PINION

1955-1957 CHEVY P/S HOSE KIT FOR OUR RACK & PINION

Hose kit needed when you install our Rack and Pinion units. Our Power Rack to a Saganaw Power Stering Pump: 1964 to 1972 ish Chevy Passenger Cars. GM, NON-Metric Power steering Pumps that have a keyway and Nut to hold the pulley on. NOT the press on pulley type.

  • Price: $52.99

1955-1957 Chevy Power Steering Hose Grommet

1955-1957 Chevy Power Steering Hose Grommet

This important grommet keeps the power steering hose in its proper place. Will work on any 1955-1957 classic Chevy model with original power steering. #819.

  • Price: $3.89

1955-1957 CHEVY POWER STEERING Pump and Double Groove Pulley

1955-1957 CHEVY POWER STEERING Pump and Double Groove Pulley

Re-Manufactured Power Steering Pump, Double Groove Pulley. Works with our Rack and Pinion set ups as well as the 605 and 500 series boxes. We have the Power Steering Brackets (front motor mount type and Side motor mount type) and Hoses on our web...

  • Price: $149.99

1955-1957 CHEVY PRESSURE HOSE FOR 605 STEERING BOX & BBC

1955-1957 CHEVY PRESSURE HOSE FOR 605 STEERING BOX & BBC

YOU ARE PURCHASING ONE (1) PRESSURE HOSE.... FOR A 1955, 1956 OR 1957 CHEVROLET PASSENGER CAR WITH A 605 STEERING BOX.... FOR BIG BLOCK CHEVY POWER STEERING CONVERSION.... O-RING STYLE....PSH006

  • Price: $37.95
  • Sale Price: $24.99

1955-1957 CHEVY RACK & PINION STEERING, Standard Bracket, Deluxe

1955-1957 CHEVY RACK & PINION STEERING, Standard Bracket, Deluxe

Our Deluxe Rack and Pinion Kit. For Stock Column. All new parts except the "re-manufactured racks". Comes with our Standard mounting bracket with bolts.  Please click on photo to get more photos and more detail on item.

  • Price: $902.93
  • Sale Price: $759.99

1955-1957 CHEVY RACK & PINION STEERING, Standard Bracket, Deluxe

1955-1957 CHEVY RACK & PINION STEERING, Standard Bracket, Deluxe

Our Deluxe Rack and Pinion Kit. For Tilt Columns with 3/4"DD set ups. All new parts except the "re-manufactured racks". Comes with our Standard mounting bracket with bolts. Please click on photo to get more photos and more detail on item.

  • Price: $902.93
  • Sale Price: $759.99

1955-1957 CHEVY RACK & PINION STEERING, Tubular Bracket, Deluxe

1955-1957 CHEVY RACK & PINION STEERING, Tubular Bracket, Deluxe

Our Deluxe Rack and Pinion Kit. For Tilt Column Set-up with 3/4DD. All new parts except the "re-manufactured racks". Comes with our Tubular mounting bracket with bolts.  "click" on photo to get more info and photos.

  • Price: $922.93
  • Sale Price: $779.99

1955-1957 CHEVY RACK & PINION STEERING, Tubular Bracket, Deluxe

1955-1957 CHEVY RACK & PINION STEERING, Tubular Bracket, Deluxe

Our Deluxe Rack and Pinion Kit. For Stock Columns. All new parts except the "re-manufactured racks". Comes with our Tubular mounting bracket with bolts.  Please "click" on photo to see more info and photos.

  • Price: $922.93
  • Sale Price: $779.99

1955-1957 CHEVY RACK and PINION STEERING, STANDARD Bracket

1955-1957 CHEVY RACK and PINION STEERING, STANDARD Bracket

These are made in the USA. All new parts except the "re-manufactured racks". Comes with the mounting bracket (black powder coated) with bolts. Re-manufactured Rack. Please click on photo to get more photos and more detail on item.

  • Price: $659.99
  • Sale Price: $559.99
(2)

1955-1957 CHEVY RACK and PINION STEERING, TUBULAR Bracket

1955-1957 CHEVY RACK and PINION STEERING, TUBULAR Bracket

Complete Lower Unit. The tubular brackets are black semi gloss powered coated. The tubular cross member unit are made in the USA and easy to install.  Please "click" on photo to see more info and photos.

  • Price: $679.99
  • Sale Price: $569.99

1955-1957 Chevy Rack & Pinion Unit Only

1955-1957 Chevy Rack & Pinion Unit Only

New.  This our Rack and Pinion Unit.  That has the modified inner tie rods and goes with our Standard Crossmember Bracket and Tubular Crossmember Brackets is made for our Rack and Pinion set up. Rack and Pinion unit only.

  • Price: $249.99

1955-1957 Chevy Standard Crossmember Rack & Pinion Bracket Only

1955-1957 Chevy Standard Crossmember Rack & Pinion Bracket Only

New.  This our Standard Crossmember Bracket is made for our Rack and Pinion set up.  It is black powder coated.  Does NOT come with hardware.  Bracket only.

  • Price: $219.99
  • Sale Price: $179.99

1955-1957 Chevy Tubular Crossmember Rack and Pinion Bracket Only

1955-1957 Chevy Tubular Crossmember Rack and Pinion Bracket Only

New.  This Tubular Crossmember Bracket is made for our Rack and Pinion set up.  It is black powder coated.  Does NOT come with hardware.  Bracket only.

  • Price: $239.99
  • Sale Price: $189.99

1955-1957 CHEVY RAG JOINT FOR 605/500 STEERING Box

1955-1957 CHEVY RAG JOINT FOR 605/500 STEERING Box

THESE ARE RECONDITIONED NOT NEW. This rag joint is for stock steering.

  • Price: $59.99
  • Sale Price: $49.99

1955-1957 CHEVY RAG JOINT FOR 605/500 STEERING BOX w/DD SHAFT

1955-1957 CHEVY RAG JOINT FOR 605/500 STEERING BOX w/DD SHAFT

THESE ARE RECONDITIONED NOT NEW. This rag joint is for a tilt column needing a DD shaft (comes with a 3/4" DD shaft installed).

  • Price: $64.99
  • Sale Price: $54.99

1955-1957 CHEVY STEERING ARM KNUCKLES FOR RACK & PINION

1955-1957 CHEVY STEERING ARM KNUCKLES FOR RACK & PINION

For 1955, 1956 and 1957 Chevy Passenger Cars, all models.  For Use with our Rack and Pinion units to maintain original turning radius. May be used with 605 or 670 power steering for tighter turning radius.  Comes with hardware.

  • Price: $179.99
  • Sale Price: $159.99

1955-1957 CHEVY STEERING SHAFT, SLEEVE & JOINTS - Stock Columns

1955-1957 CHEVY STEERING SHAFT, SLEEVE & JOINTS - Stock Columns

These go with our Rack and Pinion assemblies and Stock Columns. Made in the USA. ALL NEW PARTS. One U-Joint is a 19mm DD to 17mm DD at Rack. The other U-Joint is a 19mm DD to 19mm Round. the shaft is steel. And the sleeve is brass.

  • Price: $189.95

1955-1957 CHEVY STEERING SHAFTS & JOINTS for Tilt Columns

1955-1957 CHEVY STEERING SHAFTS & JOINTS for Tilt Columns

These go with our Rack and Pinion assemblies. and Tilt Columns with a 19mm (3/4") DD connectors. Made in the USA. ALL NEW PARTS. One U-Joint is a 19mm DD to 17mm DD at Rack. The other U-Joint is a 19mm DD to 19mmDD. the two shafts are steel.

  • Price: $189.95

1955-1957 CHEVY TIE ROD ADJUSTMENT SLEEVE, one each

1955-1957 CHEVY TIE ROD ADJUSTMENT SLEEVE, one each

This is what we use in our Rack and Pinion complete units. also can be used on stock units.  One each.  MH404.

  • Price: $19.99

BRASS SEATS for 1955 - 1964 GM 605 Units, pair

BRASS SEATS for 1955 - 1964 GM  605 Units, pair

CONVERTS O-RING TO INVERTED FLARE FITTINGS ON 1955 TO 1964 GM 605 POWER STEERING UNITS. YOU ARE PURCHASING ONE PAIR OF BRASS SEATS. WORKS ONLY WITH THE 605 UNITS -THE ONES WITH THE ROUND SNAP RING PLATES AND HAVE "605" ON THE CASTING SOMEWHERE AND ARE FOUND ONLY ON THE X-BODY CARS.

  • Price: $10.99

CHEVY SHIFT LINKAGE ADJUSTABLE SWIVEL NUT W/BUSHING

CHEVY SHIFT LINKAGE ADJUSTABLE SWIVEL NUT W/BUSHING

This is both the Shift Linkage adjustable swivel nut AND the shift column lever linkage bushing. Automatic Transmissions require 1, manual transmissions require 2. This item goes with our Shift Rod Turbo Trans.

  • Price: $18.99
  • Sale Price: $14.99

CHROME CRANKSHAFT PULLEY, Double Groove, SBC, SWP

CHROME CRANKSHAFT PULLEY, Double Groove, SBC, SWP

New, Chrome Double Groove Crankshaft Pulley.  Fits Small Block Chevy with short water pump. Trans-Dapt 9603.

  • Price: $22.89
  • Sale Price: $19.99

CHROME WATER PUMP PULLEY, Dbl Groove, Trans-Dapt 9601

CHROME WATER PUMP PULLEY, Dbl Groove, Trans-Dapt 9601

New, Chrome Double Groove Water Pump Pulley.  Small Block Chevys with Short Water pumps. 6-3/8" diam.  Trans-Dapt 9601.

  • Price: $21.89
  • Sale Price: $18.99

OEM STYLE FLEXIBLE RAG JOINT - 3/4"DD X 3/4"-30, FR1949

OEM STYLE FLEXIBLE RAG JOINT - 3/4"DD X 3/4"-30, FR1949

New.  These flexible couplings are used in many OEM style applications to absorb vibration and power steering noise. Flaming River rag joints are designed with a 3/4DD male to bolt inside 1"DD column.  14669, FR1949

  • Price: $115.99
  • Sale Price: $99.99

POWER STEERING PULLEY, Single Groove, Chrome, keyway, GM/Chevy

POWER STEERING PULLEY, Single Groove, Chrome, keyway, GM/Chevy

New, Chrome Single Groove Power Steering Pulley.  Fits Early GM & Chevy Power Steering pumps (67-84) with 5/8" Keyway. Trans-Dapt 6913.

  • Price: $24.99
  • Sale Price: $21.99

STAINLESS STEEL U-JOINT - 3/4" round X 3/4"DD, FR2589-6

STAINLESS STEEL U-JOINT - 3/4" round X  3/4"DD, FR2589-6

New.  Stainless Steel Universal Joint series.  We have carefully selected 303 Stainless Steel for its strength, superior corrosion resistance and shine.    FR2589-6.

  • Price: $89.99

STAINLESS STEEL U-JOINT - 3/4"DD X 3/4"DD, FR2516DD

STAINLESS STEEL U-JOINT - 3/4"DD X  3/4"DD, FR2516DD

New.  Stainless Steel Universal Joint series.  We have carefully selected 303 Stainless Steel for its strength, superior corrosion resistance and shine.   FR2516DD.

  • Price: $89.99

STAINLESS STEEL U-JOINT - 3/4"DD X 17MM DD, FR2559DD

STAINLESS STEEL U-JOINT - 3/4"DD X 17MM DD, FR2559DD

New.  Stainless Steel Universal Joint series.  We have carefully selected 303 Stainless Steel for its strength, superior corrosion resistance and shine.   FR2559DD.

  • Price: $89.99

UNIVERSAL BILLET JOINT - 1"DD X 3/4"-30, FR1746DD

UNIVERSAL BILLET JOINT - 1"DD X 3/4"-30, FR1746DD

New.  The Billet-Joint® Universal Joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint.    FR1746DD.

  • Price: $79.99

UNIVERSAL BILLET JOINT - 3/4" X 1"DD, FR1707DD

UNIVERSAL BILLET JOINT - 3/4" X 1"DD, FR1707DD

New.  The Billet-Joint® Universal Joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint.    FR1707DD.

  • Price: $79.99