Oldedays Classic Car Parts

New. One Pair of Bumper Guards for 1955 Chevy Nomads and Wagons. The rear guards include holes for mounting license light assemblies. Includes mounting hardware.  RR-L-359.

If your tailgate hinges are loose or worn this kit will bring everything back to normal.  Will work on any model 1955-1957 classic Chevy Nomad or wagon.  Kit contains 4 bushings and 2 pins, enough to do both hinges.  #1111.

New. One each. tooled up from scratch to reproduce these beautiful tailgate cable retractors exactly as per original. A zinc plate on the housing added for corrosion protection. Will work on any 1955-1957 classic Chevy Nomad or wagon. 1058

These fine reproductions feature all the contours designed into the original parts. The rear guards include holes for mounting license light assemblies. Includes mounting hardware.  #1005A.

These tanks have all the correct details, including the threaded sending unit mount and mounting strap depressions. Oversized shipping required. 17 Gallon. #10853

Your Tailgate can't be without this beautiful script. This script is gold finished just like the original and adds a touch of elegance to your tailgate. Approx. 6" in length. Hardware included. Each.  948, EO421B.

New.  These beautifully plated screws are for mounting the interior garnish mouldings, located above the door panels along the side windows and windshield.  Will work on the interior of any 1955-1957 Chevy Nomad. #585, 20-101.

New.  One Pair. The lower tailgate wedges are the spring loaded black plastic pieces that go on the lower tailgate in the center of the gate under the chrome plate. Will fit all models of 1955-57 classic chevy or pontiac wagons. #14699

New reproduction, polished stainless steel strikers to replace your old rusty ones. They work for Nomad or Safari 1955-1957. Made in USA.

New reproduction, 1955 1956 1957 CHEVROLET NOMAD AND PONTIAC SAFARI WAGONS. 55 56 57 . REAR SEAT BACK STOPS-LATCHES. MADE IN USA. MILLED ALUMINUM. VERY NICE. 14706 You are purchasing one set - just like the photos show.

Only high-quality plastic and original design molds are used to produce this rare lens.  Will work on any 1955 classic Chevy hardtop as well as 1955-1957 Nomads.  2 required per car.  213.

New.  One Pair. This 100% accurate door seal is held in position by nylon fasteners and have the molded ends, just like they were designed by Chevrolet. We recommend using 3M weatherstrip adhesive for installation. 2091, EO73.

New.  With this important part, glass can be safely and securely pressure-fitted into the glass metal channel.  One set per car required. Will work on any 1955-1957 classic Chevy Nomad.  #844.

These panels fit over the holes to install the window regulator and door latch area. They fit behind the door upholstery. 55-57 Chevy Nomads (for both doors) 2 large covers (9-3/4" X 9-3/4"), 2 small covers (6-3/4" X 5-1/2").

New.  This is a complete screw set for the the inner window frames on your Nomad.  Kit will work on any 1955-1957 classic Chevy Nomad.  15428, 20-387D.

New. These fit behind the side panels by the rear seat sides. They are always missing. These are laser cut and fit good. Set of 4, 2 little and 2 big as seen in the picture.

Polished stainless steel. Brand new, very nice quality reproduction. Made in the USA.

This liftgate stop rubber bumper is essential as it protects the lower tailgate if the liftgate is accidentally closed over it.  Will work on any 1955-1957 classic Chevy Nomad.  Sold as pairs.  See SGR0192 for wagons.  199, EO365.

Lower retainers, stainless steel, new reproduction, very nice. We also have the clips (item number NW0004)

Polished Stainless Steel. these are the 1955, 1956 and 1957 Chevy Nomad rear seat washers for the Rubber Stops. Nice Product. one pair.

Pair, made of polished stainless steel, 18 gauge. The white one in the picture shows the protective cover on them to protect the mirror finish.

This bumper is for the rear sliding glass on Nomads as well as the rear seat latch on Nomads and Wagons. #814

New reproduction.  Also for 1955-1957 Safari. These are very nice. 14945, RRC07

New, made to replace the rusted out ones on your Nomad. They go under the rear of the sliding window and hold the window stop. They are Laser cut and fit very nice. Come with instructions. Made of stainless steel.

Prepolished stainless steel. Mirror finish so the pictures look bad but it is very nice item. Made in USA.

One each.  What good is a tailgate if the cable is shot? Replace that worn and frayed cable with this super reproduction.  Will work on any 1955-1957 classic Chevy Nomad. #221.

1955, 1956, 1957 CHEVROLET NOMAD, WAGON TAILGATE CABLE RE-TRACTOR BRACKETS, PAIR, STAINLESS STEEL NEW REPRODUCTION, VERY NICE.

Polished Stainless Steel. One Pair. These are the Lower Hinge bolt covers on the tailgate of Chevy Nomads and Wagons. Nice Product. Only one side is polished, the other can be painted if you rather.

Polished Stainless Steel. These are the Brackets for the rubber bumper stops on the Tailgates of Nomads and Wagons. Nice Product.

These are made from Stainless Steel. A Set of 10. They hold the Curved Window Retainer in place. Nice product. 2 to 3 on top of curved glass, and 2 towards front on bottom of glass.

5557-SF

2 Door Sedan (Front doors only) Kit.

2 Window Kit.

Chrome Switches.

#14849

5557-WF 2 Door Wagon (front windows only) Kit. Chrome Switches...#14848

5557-N Nomad Complete Kit. Complete two window kit. Chrome Switches.

5557-SD Sedan Delivery Complete Kit. Complete two window kit. Chrome Switches...#14847

New.  for the Rear Side Curved Quarter Glass on Nomads. Make sure the seals you are buying are correct. Our parts are true reproductions, not approximations! Perfect dimensioning and careful quality control are combined in this quality part.#651

New. These rubber seat stops are mounted to the cars bodywork in the rear seat well of the Nomad and station wagon. They support the rear seat back cushion when the seat is folded down. #1495.

New.  This kit contains all the screws to rebuild your vent and side window frames, 30 screws in all.  Will work on any 1955-1957 classic Chevy hardtop, convertible or Nomad.  #1075.

New.  For Nomad and Wagons ONLY.  Does one hinge.  #2065, 20-477B.

All Nomad tailgates require four bumpers. Some wagons and Sedan Deliveries also utilize these same bumpers. Check your tailgate for worn or missing bumpers, which are the contact point for the closed tailgate. #1822

This liftgate stop rubber bumper is essential as it protects the lower tailgate if the liftgate is accidentally closed over it.  Will work on any 1955-1957 classic Chevy wagon.  See SGR0195 for Nomads.  183, EO57.

New.  These tailgate seals feature molded corners.  #11223.

One Each.  What good is a tailgate if the cable is shot? Replace that worn and frayed cable with this super reproduction.  Will work on any 1955-1957 classic Chevy Station Wagon.  #221A.

New.  This seal has the correct molded ends for a perfect fit every time.  Will work on the liftgate of any model 1955-57 classic Chevy wagon.  #14150.

These tanks have all the correct details, including the threaded sending unit mount and mounting strap depressions. Oversized shipping required. 17 Gallon. #10854