1955 1956 CHEVY FRONT BUMPER END, Drivers SIDE (LH) AS-IS

1955 1956 CHEVY FRONT BUMPER END, Drivers SIDE (LH) AS-IS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed bumper end. fits 1955 and 1956 Chevy passenger cars, Front Drivers side (LH). A567BEL.

  • Price: $60.00

1955-1957 CHEVY NOMAD & WGN TAILGATE GUIDE PLATE - As Is

1955-1957 CHEVY NOMAD & WGN TAILGATE GUIDE PLATE - As Is

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS.  Polished stainless steel. Brand new, very nice quality reproduction. Fits all Nomad and Wagon Tailgates (liftgates).  Made in the USA.

  • Price: $14.99

1955 CHEVY FRONT BUMPER CENTER, AS-IS

1955 CHEVY FRONT BUMPER CENTER,  AS-IS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed bumper FRONT CENTER. fits 1955 Chevy passenger cars, all models.

  • Price: $125.00

1955 CHEVY REAR BUMPER CENTER, Non-Wagon, AS-IS

1955 CHEVY REAR BUMPER CENTER, Non-Wagon,  AS-IS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed bumper end. fits 1955 Chevy passenger cars, passenger side (RH).

  • Price: $125.00

1955 CHEVY REAR BUMPER END, PASSENGER SIDE (RH) AS-IS

1955 CHEVY REAR BUMPER END, PASSENGER SIDE (RH) AS-IS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed bumper end. fits 1955 Chevy passenger cars, passenger side (RH).

  • Price: $95.00

1955 CHEVY REAR BUMPER GUARD, Passenger Side, Non-Wagon, AS-IS

1955 CHEVY REAR BUMPER GUARD, Passenger Side, Non-Wagon,  AS-IS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed REAR Bumper Guard, Passenger Side (RH). fits 1955 Chevy passenger cars, NON-Wagons.

  • Price: $45.00

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE LEFT (DRIVERS) SIDE.

  • Price: $37.50

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE LEFT (Driver) SIDE. DOES NOT HAVE HORN WIRE HOLE.

  • Price: $37.50

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, RH

1955-1956 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, RH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE RIGHT (PASSENGER) SIDE.

  • Price: $37.50

1955-1956 CHEVY CORE SUPPORT PANELS POLISHED SS. AS-IS

1955-1956 CHEVY CORE SUPPORT PANELS POLISHED SS.  AS-IS

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Fit beside the radiator and the inner fenders. One Pair, One left and one right. AS-IS.

  • Price: $75.00

1955-1957 CHEVY 605 STEERING BOX COVER, As-Is Blemishes

1955-1957 CHEVY 605 STEERING BOX COVER,  As-Is Blemishes

***AS IS - Has scratches/blemishes in finish.*** This Cover is New and laser cut from Polished Stainless Steel. They are made to cover the 605 Steering Boxes in 1955, 1956 and 1957 Chevy Passenger Cars. And is the perfect way to help dress up a bland engine compartment. Made in USA.

  • Price: $29.50

1955-1957 CHEVY ELECTRIC WIPER MOTOR COVER, AS-IS Blems

1955-1957 CHEVY ELECTRIC WIPER MOTOR COVER, AS-IS Blems

AS-IS. Has scratches/blemishes in finish. cover made from Polished stainless steel. These wiper motor covers are designed to fit over the original electric wiper motor and are the perfect way to help dress up a bland engine compartment.

  • Price: $35.50

1955-1957 Chevy Radiator Conversion Brackets, w/BLEMISHES pol ss

1955-1957 Chevy Radiator Conversion Brackets, w/BLEMISHES pol ss

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. Allows you to mount a 6 cylinder Radiator to a V-8 Core Support...

  • Price: $35.00

1956 CHEVY FRONT BUMPER GUARD, Passenger Side, AS-IS

1956 CHEVY FRONT BUMPER GUARD, Passenger Side,  AS-IS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. This is a very nice "Driver Quality" chromed FRONT Bumper Guard, Passenger Side (RH). fits 1956 Chevy passenger cars, ALL models.

  • Price: $39.95

1957 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

1957 CHEVY CORE SUPPORT PANEL w/BLEMISHES, Pol. SS, LH

THIS IS THE SAME MATERIAL AS OUR REGULAR ONES, IT JUST HAS BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. THIS IS MADE FROM PRE-POLISHED STAINLESS STEEL. Laser cut and VERY nice. Fit beside the radiator and the inner fenders. ONE EACH. ONE LEFT (DRIVERS) SIDE.

  • Price: $37.50

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES w/BLEMISHES

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES w/BLEMISHES

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. New. Made out of pre-polished stainless steel and laser cut. Note: in photo of pair, they have the white protective coating. You are getting One Pair, one left and one right.

  • Price: $19.00

1957 Chevy Front Bumper Guard, LH (Drivers side), Blem as-is

1957 Chevy Front Bumper Guard, LH (Drivers side), Blem as-is

a very nice driver quality 1957 Chevy Front Bumper Guard, drivers side (LH).  just has a few blemishes in chrome and just a few small light swirl type scratches, hard to see.  AS-IS.

  • Price: $85.00
  • Sale Price: $49.99

1957 CHEVY Heater delete Plate w/BLEMISHES, Pol. SS, 1/4" HOLES

1957 CHEVY Heater delete Plate w/BLEMISHES, Pol. SS, 1/4" HOLES

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH. SOLD AS IS. New. These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white protective covering over the mirror finish....

  • Price: $29.50

1957 CHEVY Heater delete Plate- HAS BLEMISHES, NO HOLES

1957 CHEVY Heater delete Plate- HAS BLEMISHES, NO HOLES

New. THIS ITEM IS JUST LIKE OUR NORMAL ITEM, BUT DOES HAVE BLEMISH/SCTRATCH(ES) IN THE FINISH. SOLD AS IS ......These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white...

  • Price: $29.50

1957 CHEVY Heater delete Plate- HAS BLEMISHES, STOCK HOLES

1957 CHEVY Heater delete Plate- HAS BLEMISHES, STOCK HOLES

New. THIS ITEM IS JUST LIKE OUR NORMAL ITEM, BUT DOES HAVE BLEMISH/SCTRATCH(ES) IN THE FINISH. SOLD AS IS ......These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white...

  • Price: $29.50

1957 CHEVY HEATER VALVE PLATE - w/BLEMISHES, Pol. SS

1957 CHEVY HEATER VALVE PLATE - w/BLEMISHES, Pol. SS

THESE WILL HAVE BLEMISHES/SCRATCHES IN THE FINISH.  SOLD AS IS.  New. Made out of pre-polished stainless steel and laser cut. It is for covering the heater hot water valve hole when removed.

  • Price: $7.50

1968,69,70,71,72 Buick Skylark 2 Door SILL PLATES - AS-IS

1968,69,70,71,72 Buick Skylark 2 Door SILL PLATES - AS-IS

AS IS, these are new, but one has some scuff marks on one end (see photo). New reproduction. Complete with Fisher nameplate (not installed) and the attaching hardware included. Fits 1968-1972 Buick Skylark (GM A-Body) 2 doors. You are purchasing one pair. Does NOT come with mounting screws. AS IS.

  • Price: $30.00

1968,69,70,71,72 Chevelle/El Camino 2 Door SILL PLATES- AS IS

1968,69,70,71,72 Chevelle/El Camino 2 Door SILL PLATES- AS IS

AS IS, these are new, but one has some scuff marks on one end (see photo). New reproduction. Complete with Fisher nameplate (not installed) and the attaching hardware included. Fits 1968-1972 Chevelle / El Camino (GM A-Body) 2 doors. You are...

  • Price: $30.00

1968,69,70,71,72 Pontiac GTO, Tempest 2Dr SILL PLATES - AS IS

1968,69,70,71,72 Pontiac GTO, Tempest 2Dr SILL PLATES - AS IS

AS IS, these are new, but one has some scuff marks on one end (see photo). New reproduction. Complete with Fisher nameplate (not installed) and the attaching hardware included. Fits 1968-1972 Pontiac GTO, Tempest, Le Mans (GM A-Body) 2 doors. You...

  • Price: $30.00