1955-1957 Chevy Centerlink Adapter, Power Steering to Manual

1955-1957 Chevy Centerlink Adapter, Power Steering to Manual

This centerlink adapter allows you to convert your power steering center link to a manual style when you are converting from factory power steering to 605/500 box power steering. Will work on any 1955-197 classic Chevy original power steering centerlink. 10364. ***Drop ship item***

  • Price: $81.89

1955-1957 Chevy DELUXE FRONT END REBUILD KIT, RUBBER

1955-1957 Chevy DELUXE FRONT END REBUILD KIT, RUBBER

Upper & lower ball joints, bushings, rubber bumpers, both outer tie rod ends. The bushings are rubber. Pair of Inner Tie Rods & adj. sleeves, and the front end fastener kit.

  • Price: $279.99

1955-1957 Chevy Drag Link To Pitman Arm Felt Washer, each

1955-1957 Chevy Drag Link To Pitman Arm Felt Washer, each

Felt washer. Steering ball seal that goes between the ball and the pitman arm on the steering box and the steering drag link. Fits 1955 to 1964 Full size Chevy passenger cars and Wagons. GFW001.

  • Price: $3.95

1955-1957 CHEVY FRONT END REBUILD KIT w/POWER STEERING

1955-1957 CHEVY FRONT END REBUILD KIT w/POWER STEERING

For Power Steering. Comes with 2 upper and 2 lower ball joints, 4 Lower Control Arm Bushings, 4 Upper Control Arm Bushings, 2 Tie Rod Adjusting Sleeves, 2 Outer Tie Rods. The bushings are rubber. #BSK5557P

  • Price: $197.95

1955-1957 CHEVY FRONT END REBUILD KIT, MANUAL STEERING

1955-1957 CHEVY FRONT END REBUILD KIT, MANUAL STEERING

For Manual Steering. Comes with 2 upper and 2 lower ball joints, 4 Lower Control Arm Bushings, 4 Upper Control Arm Bushings, 2 Tie Rod Adjusting Sleeves, 2 Outer Tie Rods, 2 Inner Tie Rods. The bushings are rubber. #BSK5557

  • Price: $214.95

1955-1957 Chevy FRONT END REBUILD KIT, RUBBER

1955-1957 Chevy FRONT END REBUILD KIT, RUBBER

Comes with upper and lower ball joints, upper and lower A-Arm bushings, upper and lower rubber bumpers, and a pair of outer tie rod ends. The bushings are rubber. The mounting bolts for the ball joints and grease fittings are included. RR-CHE551+2XEO743+2XEO744.

  • Price: $169.99

1955-1957 Chevy Idler Arm Bearing Kit

1955-1957 Chevy Idler Arm Bearing Kit

Long time nicknamed the Poor Mans Power Steering, these kits include everything needed to bring smoothness and ease to your steering, second only to an expensive power conversion. This kit is by far one of the most inexpensive yet major...

  • Price: $107.95

1955-1957 Chevy Idler Arm Bushing

1955-1957 Chevy Idler Arm Bushing

Will work on any 1955-1957 classic Chevy model.  Installs on the steering center link end of the idler arm.  1 required per car. #058.

  • Price: $12.95

1955-1957 Chevy Idler Arm Support Bushing

1955-1957 Chevy Idler Arm Support Bushing

Will work on any 1955-1957 classic Chevy model.  Installs on the support end o the idler arm at the frame.  1 required per car.  #059.

  • Price: $12.95

1955-1957 CHEVY INNER TIE ROD END, each

1955-1957 CHEVY INNER TIE ROD END, each

One Each.  Fits 1955, 1956 and 1957 Chevy Passenger cars. Non-Power steering: fits Left or Right side. Power Steering: for right hand side only, 055, 16754, MH401

  • Price: $27.94

1955-1957 Chevy Original Power Steering Cylinder Mounting Kit

1955-1957 Chevy Original Power Steering Cylinder Mounting Kit

This kit contains all the parts necessary to mount your power steering cylinder.  Will work on any 1955-1957 classic Chevy model with original power steering.  #011.

  • Price: $12.89

1955-1957 Chevy Original Power Steering Cylinder Rebuild Kit

1955-1957 Chevy Original Power Steering Cylinder Rebuild Kit

Each kit contains all the seals and hardware necessary to restore the smooth operation of your power steering cylinder.  Will work on any 1955-1957 classic Chevy model with original power steering.  #010.

  • Price: $16.89

1955-1957 CHEVY OUTER TIE ROD ENDS (One Pair)

1955-1957 CHEVY OUTER TIE ROD ENDS (One Pair)

This is what we use in our Rack and Pinion complete units. also can be used on stock units.  Fits 1955, 1956 and 1957 Chevrolet passenger cars, all models.

  • Price: $44.99

1955-1957 Chevy Power Steering Centerlink

1955-1957 Chevy Power Steering Centerlink

This part attaches to the power steering control valve and connects the tie rod ends to the steering gear. It is supported on the passenger side with the idler arm and drivers side with the pitman arm. Will work on any 1955-1957 classic Chevy...

  • Price: $129.99

1955-1957 Chevy Power Steering Connecting Rod Dust Cover w/Gaskt

1955-1957 Chevy Power Steering Connecting Rod Dust Cover w/Gaskt

This is the dust cover that is located on the center link where the pitman arm ball connects.  Will fit any model 1955-1957 classic Chevy with original power steering or a power steering pitman arm and centerlink.  10164A.

  • Price: $9.89

1955-1957 Chevy Power Steering Control Valve Rebuild Kit

1955-1957 Chevy Power Steering Control Valve Rebuild Kit

This power steering control valve kit contains all the seals and hardware necessary to restore the smooth operation of your power steering control valve. Will work on any 1955-1957 classic Chevy passenger car and wagon with original power steering. 009.

  • Price: $16.99

1955-1957 Chevy Power Steering Hose Grommet

1955-1957 Chevy Power Steering Hose Grommet

This important grommet keeps the power steering hose in its proper place. Will work on any 1955-1957 classic Chevy model with original power steering. #819.

  • Price: $3.89

1955-1957 CHEVY POWER STEERING HOSE KIT, V8 ONLY

1955-1957 CHEVY POWER STEERING HOSE KIT, V8 ONLY

New.  Reproduction of Factory Original.  Includes Pressure Hose (44" long), Return Hose (41.5" long) and 2 control valve to cylinder hoses.  Fits V8 Cars Only.  243,  PSH001.

  • Price: $95.95

1955-1957 Chevy Power Steering Idler Arm

1955-1957 Chevy Power Steering Idler Arm

The power steering idler arm for original power steering was 1" longer than the manual arm to allow for clearance of the steering ram cylinder. They both used the same post that bolted to the frame and the same bushings. Will work on any...

  • Price: $58.99

1955-1957 Chevy Power Steering Pitman Arm

1955-1957 Chevy Power Steering Pitman Arm

The pitman arm attaches to the steering box and one end of the center link.  Will work on any 1955-1957 classic Chevy with original power steering.  12603, 10-051.

  • Price: $55.99

1955-1957 Chevy Power Steering Pitman Arm Ball Stud

1955-1957 Chevy Power Steering Pitman Arm Ball Stud

The ball stud on the pitman arm is subject to wear so you should replace it periodically. This fine reproduction bolts in just like the original. Will work on any 1955-1957 classic Chevy running an original power steering pitman arm. 12375, 16-138.

  • Price: $21.99

1955-1957 Chevy Power Steering Ram (slave) Cylinder

1955-1957 Chevy Power Steering Ram (slave) Cylinder

New.  A much needed and sought after part. This power steering ram cylinder is brand new, not rebuilt.  Will work on any 1955-1957 Chevy Passenger Car model. 249, 8.115, TR333.

  • Price: $159.99

1955-1957 Chevy Power Steering Ram Cylinder Frame Bracket

1955-1957 Chevy Power Steering Ram Cylinder Frame Bracket

New, Reproduction of original. If you are adding factory power steeing to your classic you cannot do without this important bracket. The power steering ram cylinder bracket bolts to the frame and the end of the power steering ram attaches to it...

  • Price: $23.99
  • Sale Price: $15.99

1955-1957 Chevy Power Steering Ram Cylinder to Bracket Grommets

1955-1957 Chevy Power Steering Ram Cylinder to Bracket Grommets

One Pair. Power Steering Cylinder to Drag Link Grommets for 1955 to 1957 Chevy Passenger Cars with an original power steering set up. One end of the power steering ram attaches to a bracket on the frame and the other end to the centerlink. These...

  • Price: $5.89

1955-1957 Chevy PS Ram Cylinder Center Link Shoulder Bolt

1955-1957 Chevy PS Ram Cylinder Center Link Shoulder Bolt

Reproduction on original.  used to mount one end of power steering Ram cylinder.  13450, 16-148. 

  • Price: $15.89

1955-1957 Chevy Tie Rod Adj. Sleeve - Factory Power Steering,LH

1955-1957 Chevy Tie Rod Adj. Sleeve - Factory Power Steering,LH

Designed to replace the adjustment sleeve on the driver side of cars with factory power steering.  These will work on any 1955-1957 classic Chevy WITH factory power steering.  One required per car.  13564. 

  • Price: $16.89

1955-1957 CHEVY TIE ROD ADJUSTMENT SLEEVE, one each

1955-1957 CHEVY TIE ROD ADJUSTMENT SLEEVE, one each

This is what we use in our Rack and Pinion complete units. also can be used on stock units.  One each.  MH404.

  • Price: $19.99

1955-1957 Chevy Tie Rod End, Inner, Factory Power Steering Only

1955-1957 Chevy Tie Rod End, Inner, Factory Power Steering Only

One each. Designed to replace the inner tie rod on the driver side of cars with factory power steering.  Will work on any model 1955-1957 classic Chevy with factory power steering.  One required per car. 13560, MH406.

  • Price: $49.95

1955-1957 Manual Steering Connecting Rod Dust Cover w/Gasket

1955-1957 Manual Steering Connecting Rod Dust Cover w/Gasket

This is the dust cover that is located on the center link where the pitman arm ball connects. Designed to keep pitman arm ball socket clean and lubricated. Gasket included. will fit any model 1955-1957 classic Chevy with manual steering or a manual steering pitman arm and centerlink. 10164.

  • Price: $9.89