1957 Chevy Heater Hose Bracket

1957 Chevy Heater Hose Bracket

When details count, don't settle for inferior clamps. This bracket bolts under battery box and keeps those heater hoses in order. Will work on any 1957 classic Chevy passenger car model. 1211, 14-131. Note: clamp is silver in color and comes with mounting screw.

  • Price: $7.59

1955-1957 Chevy Starter Bracket

1955-1957 Chevy Starter Bracket

No need to improvise, we have the original design bracket!  #1162.

  • Price: $9.99

1955-1957 CHEVY WIPER BLOCK OFF, plain steel, stock design

1955-1957 CHEVY WIPER BLOCK OFF, plain steel, stock design

New. Need the cover when you go with the Raingear wiper kit or no wipers. Made from 16 gauge plain steel (paintable).

  • Price: $15.99

CHEVY RAM HORN EXHAUST MANIFOLD, LH, CENTER DUMPE, GM#3749965

CHEVY RAM HORN EXHAUST MANIFOLD, LH, CENTER DUMPE, GM#3749965

USED RAM HORN EXHAUST MANIFOLD, DRIVER SIDE (LEFT HAND). CENTER DUMP. GM3749965. NOTE: WE HAVE MORE THAT ONE OF THESE AND THE PHOTO IS JUST OT SHOW STYLE, OTHERS MAY HAVE MORE AGE TO THEM AND MAY NOT COME WITH STUDS.

  • Price: $27.99

CHEVY RAM HORN EXHAUST MANIFOLD, LH, SLANT BACK, GM3832469

CHEVY RAM HORN EXHAUST MANIFOLD, LH, SLANT BACK, GM3832469

USED RAM HORN EXHAUST MANIFOLD, DRIVER SIDE (LEFT HAND).  SLANT BACK TYPE OF DUMP. GM3832469

  • Price: $69.99

CHEVY RAM HORN EXHAUST MANIFOLD, LH, SLANT BACK, GM3855163A

CHEVY RAM HORN EXHAUST MANIFOLD, LH, SLANT BACK, GM3855163A

USED RAM HORN EXHAUST MANIFOLD, DRIVER SIDE (LEFT HAND).  SLANT BACK TYPE OF DUMP

  • Price: $69.99

CHEVY SHIFT LINKAGE ADJUSTABLE SWIVEL NUT W/BUSHING

CHEVY SHIFT LINKAGE ADJUSTABLE SWIVEL NUT W/BUSHING

This is both the Shift Linkage adjustable swivel nut AND the shift column lever linkage bushing. Automatic Transmissions require 1, manual transmissions require 2. This item goes with our Shift Rod Turbo Trans.

  • Price: $18.99
  • Sale Price: $14.99

IGNITION WIRE SUPPORT LOOMS - Polished Stainless steel

IGNITION WIRE SUPPORT LOOMS - Polished Stainless steel

New. These are made from pre-polished stainless and laser cut, very nice items to dress up your car.  Set of 4 - 2 four wire supports (large) and 2 two wire supports (small)

  • Price: $9.95
  • Sale Price: $5.99

LS1 - EMISSIONS BLOCK OFF PLATES AND COVERS - SET

LS1 - EMISSIONS BLOCK OFF PLATES AND COVERS - SET

New. These are made from stainless and pre-polished stainless steel and laser cut, very nice items to dress up your car. You are getting two different block off plates and three different covers.

  • Price: $16.95
  • Sale Price: $12.99

1955 CHEVY A-ARM DUST SHIELDS, pair

1955 CHEVY A-ARM DUST SHIELDS, pair

New.  One Pair.  Their primary job is to keep dirt out of the engine compartment, but engine heat and the elements are their chief enemy.  Dont forget these important parts when restoring the engine compartment.  546*, #3.19.

  • Price: $11.99

1955 Chevy Gas Line, V8 w/ Original Add On Oil & Fuel Filters

1955 Chevy Gas Line, V8 w/ Original Add On Oil & Fuel Filters

fuel pump to carburetor fuel/gas line.  fitted with brass end fittings. This will work in any 1955 classic Chevy with a V8 and an original add-on oil filter. For use with an inline filter, which is sold separately. 1083, GLK011.

  • Price: $19.89

1955 Chevy Hood Latch Assembly, New Reproduction

1955 Chevy Hood Latch Assembly, New Reproduction

Tired of looking at that old worn out hood latch. Now you can replace it with a brand new reproduction of the original part, cad plated and ready to install. Will work on any 1955 classic Chevy Passenger Car model (150, 210, Bel Air, Wagons, Nomads). ***drop ship item*** 14943, HO13-55L.

  • Price: $88.95

1955 CHEVY HOOD LATCH SUPPORT

1955 CHEVY HOOD LATCH SUPPORT

New.  Front end accidentally rearranged? A new latch support may help to straighten things out. Painted black.  1147, EO242

  • Price: $22.95

1955 CHEVY HOOD SPRINGS, Pair, also fits 55-57 chevy pu's

1955 CHEVY HOOD SPRINGS, Pair, also fits 55-57 chevy pu's

New, One Pair.  Springs are painted black to give you that showroom fresh look. Best purchased in pairs for even spring tension. Fits all 1955 Chevy passenger car models.  Also fits 1955-1957 Chevy Pickup trucks.  475x2, EO736.

  • Price: $23.99
  • Sale Price: $19.99

1955 Chevy Polished Stainless Hood Springs, Pair

1955 Chevy Polished Stainless Hood Springs, Pair

Everyone knows that when you try and chrome a steel spring it gets brittle and tends to break, and at the most inconvenient time. Solve that problem with these beautiful polished stainless springs, which match our polished stainless hood hinges...

  • Price: $98.95

1955 Chevy Silver Cad Plated Hood Springs, Pair

1955 Chevy Silver Cad Plated Hood Springs, Pair

One Pair of Silver Cad Plated Hood Springs.  Will work on any 1955 classic Chevy model. One Pair.

  • Price: $39.99
  • Sale Price: $21.99

1955 Chevy Starter Grommet

1955 Chevy Starter Grommet

New.  Fits EARLY 1955 Chevy Starters.  #915.

  • Price: $4.89

1955 CHEVY V8 IGNITION WIRE SUPPORT BRACKETS AND HARDWARE

1955 CHEVY V8 IGNITION WIRE SUPPORT BRACKETS AND HARDWARE

 This kit has all the original brackets, grommets, and hardware youll need to organize your ignition wires and keep everything in place.  #1158, 4.120.

  • Price: $49.99

1955-1956 Chevy Adjustable Hood Stop Kit

1955-1956 Chevy Adjustable Hood Stop Kit

New. This complete assembly will quiet that hood rattle and help to align the seams. Includes four hood stop bolts, nuts and four bumpers. Nuts and bolts are cad plated. Will work on any 1955-1956 Chevy Passenger Car model. 1035, 20-271.

  • Price: $12.89

1955-1956 CHEVY BATTERY HOLD-DOWN KIT, with J-bolts

1955-1956 CHEVY BATTERY HOLD-DOWN KIT, with J-bolts

New, for 1955 and 1956 Chevy Passenger cars. comes with Hold-down frame, "J"bolts, and nuts. #312, 3.41A. We also have the Battery Boxes as well.

  • Price: $18.95

1955-1956 CHEVY BATTERY TRAY - BOX

1955-1956 CHEVY BATTERY TRAY - BOX

NEW, battery tray/box assembly for 1955 and 1956 Chevy Nomad, Belair, Wagon, 150, and 210 cars.  This sturdy reproduction is powder coated in a durable black finish and designed to endure many years of wear and tear. 311.

  • Price: $27.99

1955-1956 CHEVY CHROME BATTERY HOLD-DOWN KIT

1955-1956 CHEVY CHROME BATTERY HOLD-DOWN KIT

Replace your battery hold down with this quality chrome plated version of the original. Includes hold-down frame, "J" bolts, and nuts. Will work on any 1955-1956 classic Chevy.  312C. ***Drop Ship Item***.

  • Price: $62.95

1955-1956 CHEVY CHROME BATTERY TRAY - BOX

1955-1956 CHEVY CHROME BATTERY TRAY - BOX

NEW, CHROME battery tray/box assembly for 1955 and 1956 Chevy Nomad, Belair, Wagon, 150, and 210 cars. Is designed to fit standard stock size battery. 13303.  ***Drop Ship Item***

  • Price: $94.95

1955-1956 CHEVY CHROME HORN COVER, each

1955-1956 CHEVY CHROME HORN COVER, each

New, One each. Replace your worn or missing horn cover with this great Chrome Horn cover. for all 1955 and 1956 Chevy passenger car models. Two needed per car.  mh209C.

  • Price: $18.95

1955-1956 CHEVY HEATER CONTROL VALVE

1955-1956 CHEVY HEATER CONTROL VALVE

New.  Heater Control Valve for all 1955-1956 classic Chevy models as well as 1955-1958 classic Chevy trucks. #014

  • Price: $59.95

1955-1956 CHEVY HEATER HOSE KIT w/ Original Ribs, V-8

1955-1956 CHEVY HEATER HOSE KIT w/ Original Ribs, V-8

New.  1955-1956 Chevy Passenger cars, with V-8. with standard or deluxe heater. Reproduction of originals with ribs on GM markings on hose. Includes original style hose clamps. 11237, OHK002

  • Price: $36.89

1955-1956 Chevy Hood Hinge Hardware Kit - Stainless Steel

1955-1956 Chevy Hood Hinge Hardware Kit - Stainless Steel

1955-1956 Chevy Hood Hinge Hardware Kit - Stainless Steel. Replace your worn out, rusty old hardware with these new stainless steel set. We also have the Hood Hinges as well.  2881.

  • Price: $15.95
  • Sale Price: $11.99

1955-1956 Chevy Hood Hinge Hardware Kit, Plated

1955-1956 Chevy Hood Hinge Hardware Kit, Plated

New.  Plated Hood Hinge hardware kit for 1955 and 1956 Chevy Passenger Cars.  2882.

  • Price: $14.99

1955-1956 CHEVY HOOD HINGES - Polished Stainless Steel- Pair

1955-1956 CHEVY HOOD HINGES - Polished Stainless Steel- Pair

New Polished Stainless Steel Hood Hinges (you are purchasing one pair). Replace those worn and loose hinges on your 1955 or 1956 Chevy passenger car with these Nice and New ones. We also have the Hood Springs and Hardware Kit as well if you need them let us know. 12380, UF-24. Drop Ship Item.

  • Price: $378.95

1955-1956 CHEVY HOOD HINGES, (Pair), New

1955-1956 CHEVY HOOD HINGES, (Pair), New

New Hood Hinges (you are purchasing one pair). Replace those worn and loose hinges on your 1955 or 1956 chevy passenger cars with these Nice and New ones.  #1216. 

  • Price: $134.95

1955-1956 CHEVY HORN INSULATORS, pair

1955-1956 CHEVY HORN INSULATORS, pair

New. One pair of horn post insulators for your 1955-1956 Chevy Car. Used on all original horns, correct red color. 14969, U-174A.

  • Price: $8.79

1955-1956 Chevy Ignition Ballast Resistor

1955-1956 Chevy Ignition Ballast Resistor

New. Ballast resistors drop the voltage to your coil so you don't burn the points. If you are burning points out frequently you may want to replace yours. A reproduction of the original style 1955-1956 ballast resistor. 099, D1110.

  • Price: $23.95

1955-1956 CHEVY V8 EXHAUST MANIFOLD BOLT LOCK SET

1955-1956 CHEVY V8 EXHAUST MANIFOLD BOLT LOCK SET

New.  Set of 4.  The regular heat-up and cool-down of the exhaust manifold will work those unprotected bolts loose. This hardware kit will aid in keeping the manifold bolts tight.  also fits 55 and 56 Vettes. 1528,  EML002.

  • Price: $15.89

1955-1956 Chevy Water Pump Fittings, 5/8"

1955-1956 Chevy Water Pump Fittings, 5/8"

One each.  10067.

  • Price: $17.89

1955-1957 Chevy Carburetor Rubber Grommet / Bushing

1955-1957 Chevy Carburetor Rubber Grommet / Bushing

This grommet / bushing is necessary to connect the carburetor linkage to the carburetor, without it your linkage will be loose and unsafe.  Will work on any 1955-1957 classic Chevy model.  #079, 27-071.

  • Price: $3.49

1955-1957 Chevy Chevrolet Valve Cover Stencil, V8

1955-1957 Chevy Chevrolet Valve Cover Stencil, V8

Without this kit, painting your valve covers can be a painstaking process.  Restore that factory look to your engine compartment. Includes two adhesive-backed stencils per kit.  Made in the United States of America. 932, VCS001.

  • Price: $12.89

1955-1957 CHEVY COWL SIDE DRAIN GUTTERS, Pair

1955-1957 CHEVY COWL SIDE DRAIN GUTTERS, Pair

New. Fits 1955, 1956 and 1957 Chevy Passenger Cars. These are a pair of cowl side drain gutters. They install at the bottom corners of the windshield on either side. The door closes over them. The cowl side drain gutter prevents water from...

  • Price: $19.89

1955-1957 Chevy Delco-Remy Detail Tags

1955-1957 Chevy Delco-Remy Detail Tags

You can rebuild your starter, distributor or generator, but until you've replaced those tarnished old tags, the job isn't finished. Will work on any 1955-1957 classic Chevy model. See part number CS0478 for the rivets that hold the tags to the electrical components. 994, SB-16.

  • Price: $11.95

1955-1957 Chevy Hood Latch Plate

1955-1957 Chevy Hood Latch Plate

You can only straighten a part so many times! This sturdy steel plate is reproduced to original specifications, and as straight as they come.  1150, EO244.

  • Price: $9.95
  • Sale Price: $8.99

1955-1957 CHEVY HOOD LATCH SPRING SET

1955-1957 CHEVY HOOD LATCH SPRING SET

New. This fits 1955, 1956 and 1957 Chevy Passenger Cars. As springs age they lose their tension; fatigued springs may not hold the hood securely in place. You can solve this problem easily by installing a new hood latch spring set. 2184, HLS001.

  • Price: $15.89

1955-1957 Chevy Inner Fender Heater Hose Clamp, Slotted

1955-1957 Chevy Inner Fender Heater Hose Clamp, Slotted

Get your heater hoses in line with these solid, heavy polished stainless steel clamps. These are slotted and will work on any 1955-1957 classic Chevy car. Includes a stainless allen head mouting screw. 2512.

  • Price: $17.99

1955-1957 Chevy Inner Fender Heater Hose Clamp, Solid

1955-1957 Chevy Inner Fender Heater Hose Clamp, Solid

Get your heater hoses in line with these solid, heavy polished stainless steel clamps. These are solid and will work on any 1955-1957 classic Chevy car. Includes a stainless allen head mouting screw. 2511.

  • Price: $17.99

1955-1957 Chevy Oil Pressure Sending Unit

1955-1957 Chevy Oil Pressure Sending Unit

An excellent replacement to the original, this sending unit is top notch. If your old unit no longer works, this will fix your problem. Will work on any 1955-1957 classic Chevy car. 016, 56-9365. Note: The sending unit wire connector end will...

  • Price: $9.89

1955-1957 Chevy Original Power Steering Cylinder Mounting Kit

1955-1957 Chevy Original Power Steering Cylinder Mounting Kit

This kit contains all the parts necessary to mount your power steering cylinder.  Will work on any 1955-1957 classic Chevy model with original power steering.  #011.

  • Price: $12.89

1955-1957 Chevy Original Power Steering Cylinder Rebuild Kit

1955-1957 Chevy Original Power Steering Cylinder Rebuild Kit

Each kit contains all the seals and hardware necessary to restore the smooth operation of your power steering cylinder.  Will work on any 1955-1957 classic Chevy model with original power steering.  #010.

  • Price: $16.89

1955-1957 CHEVY Pickup Truck HOOD SPRINGS, Pair

1955-1957 CHEVY Pickup Truck HOOD SPRINGS, Pair

New, One Pair.  Springs are painted black to give you that showroom fresh look. Best purchased in pairs for even spring tension. Also fits 1955 Chevy Passenger cars all models.  475x2, EO736.

  • Price: $23.99

1955-1957 Chevy Power Steering Control Valve Rebuild Kit

1955-1957 Chevy Power Steering Control Valve Rebuild Kit

This power steering control valve kit contains all the seals and hardware necessary to restore the smooth operation of your power steering control valve. Will work on any 1955-1957 classic Chevy passenger car and wagon with original power steering. 009.

  • Price: $16.99

1955-1957 CHEVY V-8 DISTRIBUTOR HOLD DOWN CLAMP

1955-1957 CHEVY V-8 DISTRIBUTOR HOLD DOWN CLAMP

New, One each.  Slotted for adjustment.  for small blocks or big blocks.

  • Price: $1.99

1955-1957 Chevy V-8 Throttle Arm, w-bushings

1955-1957 Chevy V-8 Throttle Arm, w-bushings

This is the part of the throttle linkage that attaches to the throttle pedal  under the hood for V8 engines.  This will work on any 1955-1957 classic Chevy model with a V8 engine.  comes with bushings.  1157, EO75.

  • Price: $15.95

1955-1957 CHEVY WIPER BLOCK OFF POL. S/S

1955-1957 CHEVY WIPER BLOCK OFF POL. S/S

Pre-polished stainless steel, 18 gauge. Block off plate to be used when you install aftermarket Wiper units or remove your wiper motor. Picture looks like it is dull grey but it has a mirror like finish. See the other picture with a camera reflection to show the finish better.

  • Price: $21.95
  • Sale Price: $15.99

1955-1958 Chevy Brake Master Cylinder Hardware Set

1955-1958 Chevy Brake Master Cylinder Hardware Set

Fits standard or power brakes, works only on original equipment master cylinder. Includes original style bolt, 2 copper washers and brass junction block.  Fits 1955 to 1958 Chevy Passenger Cars.  2196, CHK001.

  • Price: $24.99

1955-1958 CHEVY TRUCK HEATER CONTROL VALVE

1955-1958 CHEVY TRUCK HEATER CONTROL VALVE

New.  Heater Control Valve for 1955, 1956, 1957 and 1958 Chevy Trucks.  #014.

  • Price: $63.99

1955-1964 Chevy Accelerator Linkage Sleeve

1955-1964 Chevy Accelerator Linkage Sleeve

This sleeve installs inside carburetor grommet / bushing (part #ET0088). The carb linkage rod then installs into this sleeve. All 1955-1964 GM engines use two sleeves each, except for 4 barrel carburetors and fuel injected cars, which use only...

  • Price: $1.99

1955-1974 Chevy Distributor Wire Replacement Lead, Point Dist.

1955-1974 Chevy Distributor Wire Replacement Lead, Point Dist.

In the course of time this wire can get frayed and damaged. This part will keep your car running smooth. Installs in the side of the distributor housing. Will work on any 1955-1974 classic Chevy running a points distributor. #095. DDL36.

  • Price: $5.89

1956 CHEVY A-ARM DUST SHIELD RETAINERS w/ STAPLES

1956 CHEVY A-ARM DUST SHIELD RETAINERS w/ STAPLES

New.  Your A-Arm dust shield retainers are constantly exposed to the elements. If they are rusted or damaged, chances are good that they no longer hold your dust shields in place. #2053.

  • Price: $11.89

1956 CHEVY A-ARM DUST SHIELDS, pair

1956 CHEVY A-ARM DUST SHIELDS, pair

New.  These shields are made exactly like Chevys first design.  Their primary job is to keep dirt out of the engine compartment, but engine heat and the elements are their chief enemy.  #546.

  • Price: $12.89

1956 Chevy Hood Latch Assembly, New Reproduction

1956 Chevy Hood Latch Assembly, New Reproduction

Tired of looking at that old worn out hood latch. Now you can replace it with a brand new reproduction of the original part, cad plated and ready to install. Will work on any 1956 classic Chevy Passenger Car model (150, 210, Bel Air, Wagons, Nomads). 15896, HO13-56L.

  • Price: $88.95
  • Sale Price: $79.99

1956 CHEVY HOOD LATCH SUPPORT

1956 CHEVY HOOD LATCH SUPPORT

New.  Front end accidentally rearranged? A new latch support may help to straighten things out. Painted black.  14972

  • Price: $22.99

1956 CHEVY HOOD SPRINGS, Pair

1956 CHEVY HOOD SPRINGS, Pair

New, One Pair. Springs are painted black to give you that showroom fresh look. Best purchased in pairs for even spring tension. Fits all 1956 Chevy passenger car models.  476x2, 10-163x2.

  • Price: $23.99

1956 CHEVY IGNITION WIRE SUPPORT BRACKETS and HARDWARE, V8

1956 CHEVY IGNITION WIRE SUPPORT BRACKETS and HARDWARE, V8

New.  This (27 Piece) kit has all the original brackets, grommets, and hardware youll need to organize your ignition wires and keep everything in place.  #1159, 4.121.

  • Price: $49.99

1956 Chevy Polished Stainless Hood Springs, Pair

1956 Chevy Polished Stainless Hood Springs, Pair

Everyone knows that when you try and chrome a steel spring it gets brittle and tends to break, and at the most inconvenient time. Solve that problem with these beautiful polished stainless springs, which match our polished stainless hood hinges...

  • Price: $98.95

1956-1957 CHEVY LOWER IGNITION WIRE SUPPORT SHIELDS

1956-1957 CHEVY LOWER IGNITION WIRE SUPPORT SHIELDS

New.  Mounted to the engine block behind the exhaust manifolds, these shields protect the ignition wires from damaging engine heat. Made in the USA.  #1446.

  • Price: $28.95

1956-1964 Chevy V-8 Hi-Perf Ignition Ballast Resistor

1956-1964 Chevy V-8 Hi-Perf Ignition Ballast Resistor

Ballast resistors properly control the voltage upon start-up.  If you are burning points out frequently you may want to replace yours.  A reproduction of the original style for cars with V-8, 4bbl Carbs or fuel injection. 15065, D1111.

  • Price: $23.89

1957 Chevy A-Arm Dust Shield Retainers with Fasteners

1957 Chevy A-Arm Dust Shield Retainers with Fasteners

New.  Your A-Arm dust shield retainers are constantly exposed to the elements. If they are rusted or damaged, chances are good that they no longer hold your dust shields in place. #2054, RR-C7-132100.

  • Price: $17.89

1957 CHEVY A-ARM DUST SHIELDS, PAIR.

1957 CHEVY A-ARM DUST SHIELDS, PAIR.

New.  These shields are made exactly like Chevys first design.  Their primary job is to keep dirt out of the engine compartment, but engine heat and the elements are their chief enemy.  #547, #3.21.

  • Price: $11.89

1957 CHEVY ADJUSTABLE HOOD STOP KIT

1957 CHEVY ADJUSTABLE HOOD STOP KIT

New.  This complete assembly will quiet that hood rattle and help to align the seams. Includes two hood stop bolts, nuts and two bumpers.  Nuts and bolts are cad plated.  will work on any 1957 classic Chevy model.  1034, 20-270.

  • Price: $6.89

1957 CHEVY BATTERY HOLD-DOWN KITS, 314

1957 CHEVY BATTERY HOLD-DOWN KITS, 314

New, for 1957 Chevy Passenger cars. comes with Hold-down frame, "J"bolts, and nuts. #314. This is the Standard one. We also have the Battery Boxes as well.

  • Price: $15.99

1957 CHEVY BATTERY HOLD-DOWN KITS, High Quality, 1784

1957 CHEVY BATTERY HOLD-DOWN KITS, High Quality, 1784

New, for 1957 Chevy Passenger cars. comes with Hold-down frame, "J"bolts, and nuts. #1784. This is the High Quality one, Each plastic coated bracket has an extra smooth finish. We also have the Battery Boxes as well.

  • Price: $24.89

1957 CHEVY BATTERY TRAY - BOX

1957 CHEVY BATTERY TRAY - BOX

NEW, battery tray/box assembly for 1957 Chevy Nomad, Belair, Wagon, 150, and 210 cars. This sturdy reproduction is powder coated in a durable black finish and designed to endure many years of wear and tear. 313

  • Price: $28.95
  • Sale Price: $22.99

1957 CHEVY CHROME BATTERY HOLD-DOWN KIT

1957 CHEVY CHROME BATTERY HOLD-DOWN KIT

Replace your battery hold down with this quality chrome plated version of the original. Includes hold-down frame, "J" bolts, and nuts. Will work on any 1957 classic Chevy car.  314C. ***Drop Ship Item***.

  • Price: $99.95

1957 CHEVY CHROME BATTERY TRAY - BOX

1957 CHEVY CHROME BATTERY TRAY - BOX

NEW, CHROME battery tray/box assembly for 1957 Chevy Nomad, Belair, Wagon, 150, and 210 cars. Is designed to fit standard stock size battery. 13304.  ***Drop Ship Item***

  • Price: $94.95

1957 CHEVY FIREWALL AREA Steel, holes in Heater delete plate

1957 CHEVY FIREWALL AREA Steel, holes in Heater delete plate

New. These are made from 16 gauge plain steel and laser cut, so you can paint. Very nice items to dress up the engine compartment. Contains: One Heater valve plate, One Wiper Block off plate, one Heater delete plate (with STOCK Holes and Slots) and a pair of Fresh Air Vent Block off plates.

  • Price: $67.99

1957 CHEVY FIREWALL AREA Steel, no holes in Heater delete plate

1957 CHEVY FIREWALL AREA Steel, no holes in Heater delete plate

New. These are made from 16 gauge plain steel and laser cut, so you can paint. Very nice items to dress up the engine compartment. Contains: One Heater valve plate, One Wiper Block off plate, one Heater delete plate (with NO Holes) and a pair of Fresh Air Vent Block off plates.

  • Price: $67.99

1957 CHEVY FRESH AIR DUCT VENT FLUTTER VALVE SEAL SET

1957 CHEVY FRESH AIR DUCT VENT FLUTTER VALVE SEAL SET

New.  seal set for 1957 Fresh air duct vent flutter valve.  #C142

  • Price: $9.99

1957 CHEVY FRESH AIR INLET SLEEVE, pair

1957 CHEVY FRESH AIR INLET SLEEVE, pair

New.  These fresh air inlet sleeves seal the connection between the front duct assembly and the rear duct and valve assembly on all 1957 classic chevy models.    #326.

  • Price: $9.89

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES - Plain Steel

1957 CHEVY FRESH AIR VENT BLOCK OFF PLATES - Plain Steel

New. Made out of plain steel (paintable) and laser cut.  You are getting One Pair, one left and one right.

  • Price: $24.99
  • Sale Price: $19.99

1957 CHEVY GRILLE BAR & HOOD LATCH SUPPORT BRACKETS - S.S.

1957 CHEVY GRILLE BAR & HOOD LATCH SUPPORT BRACKETS - S.S.

This set has the two Grille Bar support brackets as well as the Hood Latch Support Bracket. All is made from Stainless Steel. Nice stuff!  Made in the USA.

  • Price: $54.99
  • Sale Price: $39.95

1957 CHEVY GRILLE BAR SUPPORT BRACKETS - Stainless Steel, Pair.

1957 CHEVY GRILLE BAR SUPPORT BRACKETS - Stainless Steel, Pair.

New.  This set has the two Grille Bar support brackets. All is made from Stainless Steel. Proudly Made in the USA!!!  Nice stuff!

  • Price: $29.99
  • Sale Price: $19.99

1957 CHEVY HEATER CONTROL VALVE

1957 CHEVY HEATER CONTROL VALVE

These reproductions are like the NOS originals, but with the clip that replaced the capillary tube. If your valve had the temperature capillary tube and you want to keep it, simply remove the clip from the new valve and replace it with your own original tube. #013.

  • Price: $58.95

1957 CHEVY Heater delete Plate POLISHED STAINLESS, NO HOLES

1957 CHEVY Heater delete Plate POLISHED STAINLESS, NO HOLES

New. These are made from pre-polished stainless and laser cut, very nice items to dress up the engine compartment. All come with a white protective covering over the mirror finish. NOTE: you will need to remove the protective white coating. THIS IS THE SOLID PLATE WITH: **NO HOLES**

  • Price: $54.99
  • Sale Price: $39.99

1957 CHEVY Heater delete Plate, plain steel, NO HOLES

1957 CHEVY Heater delete Plate, plain steel, NO HOLES

New. These are made from 16 gauge plain steel and laser cut, so you can paint. Very nice items to dress up the engine compartment. THIS IS THE SOLID PLATE WITH: **NO HOLES**

  • Price: $27.99

1957 CHEVY Heater delete Plate, plain steel, STOCK HOLES

1957 CHEVY Heater delete Plate, plain steel, STOCK HOLES

New. These are made from 16 gauge plain steel and laser cut, so you can paint. Very nice items to dress up the engine compartment. THIS IS THE SOLID PLATE WITH: **STOCK HEATER MOUNTING HOLES (TWO HOLES ON ONE SIDE AND TWO SLOTS ON OTHER SIDE)

  • Price: $27.99

1957 CHEVY HEATER HOSE KIT w/ Original Ribs, 8 CYLINDER

1957 CHEVY HEATER HOSE KIT w/ Original Ribs, 8 CYLINDER

New.  1957 Chevy Passenger cars, 8 cyl. with standard or deluxe heater. Non-A/C. Reproduction of origianls with ribs on hose. Includes original style hose clamps. 11239, OHK001

  • Price: $36.95
  • Sale Price: $29.99

1957 CHEVY HEATER HOSE KIT, 8 CYLINDER

1957 CHEVY HEATER HOSE KIT, 8 CYLINDER

New.  1957 Chevy Passenger cars, 8 cyl. with standard or deluxe heater. Non-A/C. Reproduction with GM square stamped on hose. Includes original style hose clamps. HHK001

  • Price: $28.99
  • Sale Price: $23.99

1957 CHEVY HEATER VALVE PLATE - Plain steel

1957 CHEVY HEATER VALVE PLATE - Plain steel

New. Made out of 16 gauge plain steel and laser cut. It is for covering the heater hot water valve hole when removed.  paintable. 

  • Price: $10.99

1957 Chevy Hood Hinge Hardware Kit - Plated

1957 Chevy Hood Hinge Hardware Kit - Plated

This 10 piece (plus washers) cad plated hardware kit has all the fasteners you need to install the hood hinges on your classic.  Will work on any 1957 classic Chevy.  2880.

  • Price: $14.95
  • Sale Price: $8.95

1957 Chevy Hood Hinge Hardware Kit - Stainless Steel

1957 Chevy Hood Hinge Hardware Kit - Stainless Steel

1957 Chevy Hood Hinge Hardware Kit - Stainless Steel. Replace your worn out and rusty old set with these new stainless steel set. We also have the hood hinges and springs. 2879.

  • Price: $17.95
  • Sale Price: $13.99

1957 CHEVY HOOD HINGES - (Pair)- New

1957 CHEVY HOOD HINGES - (Pair)- New

New Reproduction Steel Hood Hinges (you are purchasing one pair). Replace those worn and loose hinges on your 1957 Chevy with these Nice and New ones. We also have the Hood Springs and Hardware kit as well if you need them let us know. 12223, BPC-129.

  • Price: $163.99
  • Sale Price: $149.99

1957 CHEVY HOOD HINGES - Polished Stainless Steel- (Pair)- New

1957 CHEVY HOOD HINGES - Polished Stainless Steel- (Pair)- New

New Polished Stainless Steel Hood Hinges (you are purchasing one pair). Replace those worn and loose hinges on your 1957 Chevy with these Nice and New ones. We also have the Hood Springs and Hardware Kit as well if you need them let us know. 12381, UF-22. Drop Ship Item.

  • Price: $378.99

1957 Chevy Hood Latch Assembly, New Reproduction

1957 Chevy Hood Latch Assembly, New Reproduction

Tired of looking at that old worn out hood latch. Now you can replace it with a brand new reproduction of the original part, cad plated and ready to install. Will work on any 1957 classic Chevy Passenger Car model (150, 210, Bel Air, Wagons, Nomads). 15897, HO13-57L, HOL-57, 54-207.

  • Price: $99.95
  • Sale Price: $84.99

1957 CHEVY HOOD LATCH SUPPORT BRACKET

1957 CHEVY HOOD LATCH SUPPORT BRACKET

New.  Front end accidentally rearranged? A new latch support may help to straighten things out. Painted black.  1149, EO247.

  • Price: $23.99

1957 CHEVY HOOD LATCH SUPPORT BRACKET - S.S.

1957 CHEVY HOOD LATCH SUPPORT BRACKET - S.S.

New. One Hood Latch Support Bracket. Made from Stainless Steel. Proudly Made in the USA!!!  Nice stuff!

  • Price: $29.99
  • Sale Price: $19.99

1957 CHEVY HOOD SPRINGS, Pair

1957 CHEVY HOOD SPRINGS, Pair

New, One Pair. Springs are painted black to give you that showroom fresh look. Best purchased in pairs for even spring tension. Fit all 1957 Chevy Passenger car models.  477x2.

  • Price: $28.99

1957 CHEVY IGNITION WIRE SUPPORT BRACKETS, V8

1957 CHEVY IGNITION WIRE SUPPORT BRACKETS, V8

New. This kit has all the original brackets, grommets, and hardware youll need to organize your ignition wires and keep everything in place. To complete the job you will need a set of our #EC0061 Lower Ignition Wire Shields. #1160, 4.122.

  • Price: $33.95

1957 Chevy Polished Stainless Hood Springs, Pair

1957 Chevy Polished Stainless Hood Springs, Pair

Everyone knows that when you try and chrome a steel spring it gets brittle and tends to break, and at the most inconvenient time. Solve that problem with these beautiful polished stainless springs, which match our polished stainless hood hinges...

  • Price: $98.95

1957 CHEVY RADIATOR CORE SUPPORT WIRING GROMMET

1957 CHEVY RADIATOR CORE SUPPORT WIRING GROMMET

New.  This grommet installs in the driver side of the core support filler panel and the harness for the front Grille Bar lights mounts inside.  will work on all 1957 classic chevy models.  #357.

  • Price: $4.89

1957 CHEVY SPEEDOMETER CABLE GROMMET

1957 CHEVY SPEEDOMETER CABLE GROMMET

New. If unprotected by a grommet, the hole where cables and wires pass through the firewall is often the start of peeling paint. Once loosened at the firewall hole, it is often difficult to stop. Protect that well-detailed firewall! Will work on all 1957 Chevy Passenger Car models. #823.

  • Price: $3.94

1957 CHEVY WINDSHIELD WIPER ELECTRIC MOTOR SLIDE

1957 CHEVY WINDSHIELD WIPER ELECTRIC MOTOR SLIDE

New. These under-the-hood connections are plastic, they are prone to heat deterioration and discoloration.  Don’t let them break unexpectedly. This is a low-cost item that should be replaced regularly. Also fits 1956-1962 Corvettes. 211

  • Price: $6.99

1957-1958 CHEVY BATTERY HOLD DOWN BRACKET ONLY

1957-1958 CHEVY BATTERY HOLD DOWN BRACKET ONLY

New.  for all 1957 and 1958 Chevy Passenger cars.  this is only the Hold down bracket, NO "J" bolts included with this item.  EO573

  • Price: $9.95

1957-1964 CHEVY EXHAUST MANIFOLD BOLT LOCK SET

1957-1964 CHEVY EXHAUST MANIFOLD BOLT LOCK SET

New.  Set of 4.  The regular heat-up and cool-down of the exhaust manifold will work those unprotected bolts loose. This hardware kit will aid in keeping the manifold bolts tight.  also fits 57 to 63 Vettes. 1529,  EML001.

  • Price: $13.99

1957-1964 Chevy Ignition Ballast Resistor

1957-1964 Chevy Ignition Ballast Resistor

New. Ballast resistors drop the voltage to your coil so you don't burn the points. If you are burning points out frequently you may want to replace yours. A reproduction of the original style 1957-1964 ballast resistor. 099A, D1110A.

  • Price: $23.89

Bulk Heater Hose, 1/2 inch, sold by the foot

Bulk Heater Hose, 1/2 inch, sold by the foot

New, 1/2 inch Heater hose, Napa Wildfire Hose H156.  click on photo for more info.  order quantity of how many feet you want, price is $1.59 per foot.

  • Price: $1.59

Bulk Heater Hose, 3/4 inch, sold by the foot

Bulk Heater Hose, 3/4 inch, sold by the foot

New, 3/4 inch Heater hose, Gates Saftety Stripe.  click on photo for more info.  order quantity of how many feet you want, price is $1.99 per foot.

  • Price: $1.99

Bulk Heater Hose, 5/8 inch, sold by the foot

Bulk Heater Hose, 5/8 inch, sold by the foot

New, 5/8 inch Heater hose, Gates Saftety Stripe.  click on photo for more info.  order quantity of how many feet you want, price is $1.79 per foot.

  • Price: $1.79

CHEVY SMALL BLOCK STARTER SUPPORT Bracket, Stainless Steel

CHEVY SMALL BLOCK STARTER SUPPORT Bracket, Stainless Steel

Small block Chevy starter support, stainless steel. Fits on the side of the block and the front of the starter. Works on STOCK SBC engines with STOCK starter setups.  Made in the USA.

  • Price: $5.49

Chevy Stainless Kickdown Cable Holding Bracket, TH-350, 700R-4

Chevy Stainless Kickdown Cable Holding Bracket, TH-350, 700R-4

New, One Each. This stainless steel bracket is for the kickdown cable on a Turbo 350 and 700R4 on Small Block Chevys. It mounts on the driver side of the engine on the two rear intake manifold bolts. Made in the USA. 11268

  • Price: $22.99

ELECTRIC VACUUM PUMP - CHEVY PONTIAC MOPAR FORD

ELECTRIC VACUUM PUMP - CHEVY PONTIAC MOPAR FORD

EVP01. New. This kit comes with the bracket to mount it any where you want. Electric pump with instructions, Drop Ship Item, EVP01.

  • Price: $208.95