1949-1954 CHEVY SIDE MOTOR MOUNT BRACKETS ONLY

1949-1954 CHEVY SIDE MOTOR MOUNT BRACKETS ONLY

A pair of side motor mount Brackets only for 1949 to 1954 Chevy passenger cars to mount V-8 engines. SBC or BBC. Will not work with stock steering. you must change to a mustang II front end.

  • Price: $97.99
  • Sale Price: $69.99

1955-1957 Chevy Lower Trunk Floor Shock Support, LH

1955-1957 Chevy Lower Trunk Floor Shock Support, LH

Should be used in conjunction with the upper trunk floor shock supports which are what you see when you are looking inside the trunk, while these (the lower trunk floor shock supports) are seen when looking up from the underside of the car. Driver Side, Excluding Wagons and Nomads. D-2761, C-9032.

  • Price: $63.99
  • Sale Price: $54.99

1955-1957 Chevy Lower Trunk Floor Shock Support, RH

1955-1957 Chevy Lower Trunk Floor Shock Support, RH

Should be used in conjunction with the upper trunk floor shock supports which are what you see when you are looking inside the trunk, while these (the lower trunk floor shock supports) are seen when looking up from the underside of the car....

  • Price: $63.99
  • Sale Price: $54.99

1955-1957 Chevy Radiator Conversion Bracket -Pol. ss, w/hardware

1955-1957 Chevy Radiator Conversion Bracket -Pol. ss, w/hardware

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. These brackets will allow you to mount your V-8 radiator into the 6-cylinder position using your V-8 core support. comes w/ hardware.

  • Price: $75.99
  • Sale Price: $65.99

1955-1956 CHEVY GLOVE BOX OPEN STOP ARM BRACKET

1955-1956 CHEVY GLOVE BOX OPEN STOP ARM BRACKET

Made in the USA. This is made from Stainless Steel. You are buying one each. This is for 1955 and 1956 Chevy Passenger Cars. 15894

  • Price: $11.99
  • Sale Price: $7.99

1955-1957 CHEVY CHEVROLET 605 POWER STEERING BRACKET

1955-1957 CHEVY CHEVROLET 605 POWER STEERING BRACKET

1955, 1956 and 1957 CHEVROLET PASSENGER CAR 605 POWER STEERING BRACKET TO INSTALL 605 POWER STEERING. Comes with instructions. WORKS ONLY WITH THE 605 UNITS (THE ONES WITH THE ROUND SNAP RING PLATES AND HAVE "605" ON THE CASTING SOMEWHERE AND ARE FOUND ONLY ON THE X-BODY CARS.

  • Price: $51.99
  • Sale Price: $39.99

1955-1957 CHEVY CHEVROLET SWAY BAR BRACKETS - Tubular A-Arms

1955-1957 CHEVY CHEVROLET SWAY BAR BRACKETS - Tubular A-Arms

You will need to drill one 3/8" hole on each side. Note Photos. Easy to install and works good. NOTE: for use with Tubular Control A-Arms ONLY (like in photo).

  • Price: $27.95
  • Sale Price: $22.99

1955-1957 CHEVY LOWER SEAT SHELL/FORWARD STOP BRACKET - LH

1955-1957 CHEVY LOWER SEAT SHELL/FORWARD STOP BRACKET - LH

1955, 1956 and 1957 Chevy passenger car Lower Seat Shell / Forward Stop bracket.  For the Drivers (LH) Side. 12720.

  • Price: $59.95
  • Sale Price: $39.99

1955-1957 CHEVY LOWER SEAT SHELL/FORWARD STOP BRACKET - RH

1955-1957 CHEVY LOWER SEAT SHELL/FORWARD STOP BRACKET - RH

1955, 1956 and 1957 Chevy passenger car Lower Seat Shell / Forward Stop bracket.  For the Passengers (RH) Side. 12721.  Made in the USA.

  • Price: $59.95
  • Sale Price: $39.99

1955-1957 CHEVY LOWER SEAT SHELL/FORWARD STOP BRACKETS

1955-1957 CHEVY LOWER SEAT SHELL/FORWARD STOP BRACKETS

1955, 1956 and 1957 Chevy passenger car Lower Seat Shell / Forward Stop bracket.  One for the Drivers (LH) AND one for the Passengers (RH) Side. One Pair.

  • Price: $109.99
  • Sale Price: $78.99

1955-1957 CHEVY LS1/6 SIDE MOTOR MOUNTS Conversion Brackets, set

1955-1957 CHEVY LS1/6 SIDE MOTOR MOUNTS Conversion Brackets, set

These brackets allow you to install an LS1/6 series engine into a vehicle that is set up for a Chevy SB V8 that uses a standard Chevy 3 bolt engine mount. Made in the USA.

  • Price: $49.99
  • Sale Price: $34.99

1955-1957 CHEVY NOMAD SLIDING WINDOW SUPPORT BRACKETS, pair

1955-1957 CHEVY NOMAD SLIDING WINDOW SUPPORT BRACKETS, pair

New, made to replace the rusted out ones on your Nomad. They go under the rear of the sliding window and hold the window stop. They are Laser cut and fit very nice. Come with instructions. Made of stainless steel . One Pair.

  • Price: $34.99
  • Sale Price: $29.99

1955-1957 CHEVY NOMAD WGN TAILGATE BUMPER STOP BRCKTS-Pol.SS

1955-1957 CHEVY NOMAD WGN TAILGATE BUMPER STOP BRCKTS-Pol.SS

Polished Stainless Steel. One Pair.  These are the Brackets for the rubber bumper stops on the Tailgates of Nomads and Wagons. Nice Product.  Made in the USA.

  • Price: $19.89
  • Sale Price: $17.99

1955-1957 CHEVY NOMAD, WGN TAILGATE CABLE RETRACTOR BRACKETS, SS

1955-1957 CHEVY NOMAD, WGN TAILGATE CABLE RETRACTOR BRACKETS, SS

Made from Stainless Steel! New Reproduction, Very Nice. One Pair. Fit all 1955, 1956, 1957 CHEVROLET NOMAD and WAGONS.

  • Price: $34.95
  • Sale Price: $29.99

1955-1957 CHEVY POWER BRAKE BOOSTER BRACKET, SS, SHORT

1955-1957 CHEVY POWER BRAKE BOOSTER BRACKET, SS, SHORT

New. GM POWER BRAKE BOOSTER BRACKET, SHORT (FLAT) TYPE, ABOUT 1.5". 12 gauge STAINLESS STEEL. MADE IN USA. Very nice.... FOR 1955, 1956 AND 1957 CHEVROLET PASSENGER CARS and Wagons .... FOR BOLTING BOOSTER TO FIREWALL.

  • Price: $24.99
  • Sale Price: $12.99

1955-1957 Chevy Power Steering Ram Cylinder Frame Bracket

1955-1957 Chevy Power Steering Ram Cylinder Frame Bracket

New, Reproduction of original. If you are adding factory power steeing to your classic you cannot do without this important bracket. The power steering ram cylinder bracket bolts to the frame and the end of the power steering ram attaches to it...

  • Price: $23.99
  • Sale Price: $15.99

1955-1957 Chevy Radiator Conversion Bracket -Polished SS, Pair

1955-1957 Chevy Radiator Conversion Bracket -Polished SS, Pair

THESE ARE MADE FROM PRE-POLISHED STAINLESS STEEL, laser cut and very nice. Fit between the radiator and Core Supports. These brackets will allow you to mount your V-8 radiator into the 6-cylinder position using your V-8 core support. One pair.

  • Price: $59.99
  • Sale Price: $49.99

1955-1957 CHEVY SIDE MOTOR MOUNT Brackets, Stock Pos., 2 piece

1955-1957 CHEVY SIDE MOTOR MOUNT Brackets, Stock Pos., 2 piece

This one is for the stock location and for a TWO piece (Welded - with seam) frame on 1955-1957 Chevy cars. Made in the USA. Comes with hardware. These fit SBC and can be used with BBC but you will probably have to modify the firewall for clearance.

  • Price: $53.99
  • Sale Price: $49.99

1955-1957 CHEVY TURBO TRANSMISSION MOUNTS Brackets

1955-1957 CHEVY TURBO TRANSMISSION MOUNTS Brackets

New. These mounts are the ones you need to make the new engine fit nice and the transmission needs for the extra support. Made in the USA. With bolts and instructions.  Fit all Automatic Turbo Transmissions, NOT Manual.

  • Price: $79.99
  • Sale Price: $67.99
(1)

1955-1964 CHEVY POWER BRAKE BOOSTER BRACKET, SS, TALL

1955-1964 CHEVY POWER BRAKE BOOSTER BRACKET, SS, TALL

New. GM POWER BRAKE BOOSTER BRACKET, TALL TYPE, ABOUT 3". STAINLESS STEEL. MADE IN USA. Very nice..... FOR 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963 AND 1964 CHEVROLET PASSENGER CARS..... FOR BOLTING BOOSTER TO FIREWALL.

  • Price: $27.95
  • Sale Price: $14.99

1957 CHEVY GLOVE BOX OPEN STOP ARM BRACKET

1957 CHEVY GLOVE BOX OPEN STOP ARM BRACKET

Made in the USA. This is made from Stainless Steel. You are buying one each. This is for 1957 Chevy Passenger Cars. 15895

  • Price: $11.99
  • Sale Price: $7.99

1957 CHEVY GRILLE BAR & HOOD LATCH SUPPORT BRACKETS - S.S.

1957 CHEVY GRILLE BAR & HOOD LATCH SUPPORT BRACKETS - S.S.

This set has the two Grille Bar support brackets as well as the Hood Latch Support Bracket. All is made from Stainless Steel. Nice stuff!  Made in the USA.

  • Price: $54.99
  • Sale Price: $39.95

1957 CHEVY GRILLE BAR SUPPORT BRACKETS - Stainless Steel, Pair.

1957 CHEVY GRILLE BAR SUPPORT BRACKETS - Stainless Steel, Pair.

New.  This set has the two Grille Bar support brackets. All is made from Stainless Steel. Proudly Made in the USA!!!  Nice stuff!

  • Price: $29.99
  • Sale Price: $19.99

1957 CHEVY HOOD LATCH SUPPORT BRACKET - S.S.

1957 CHEVY HOOD LATCH SUPPORT BRACKET - S.S.

New. One Hood Latch Support Bracket. Made from Stainless Steel. Proudly Made in the USA!!!  Nice stuff!

  • Price: $29.99
  • Sale Price: $19.99

1958-1964 CHEVROLET 605 POWER STEERING BRACKET

1958-1964 CHEVROLET 605 POWER STEERING BRACKET

1958-64 Chevrolet passenger car 605 power steering bracket to install power steering.

  • Price: $57.99
  • Sale Price: $39.99

1959-1964 CHEVY CHEVROLET FRONT DISC BRAKE BRACKET SET - NEW

1959-1964 CHEVY CHEVROLET FRONT DISC BRAKE BRACKET SET - NEW

Fits 1959-1964 chevy passenger cars. Made in the USA. Comes with hardware and instructions.  You will need to use: eleven inch rotors from 1969-1972 Chevelle. Calipers from 1979-1985 Monte Carlo

  • Price: $77.99
  • Sale Price: $59.99

1965-1968 CHEVY Impala FRONT DISC BRAKE BRACKET SET - NEW

1965-1968 CHEVY Impala FRONT DISC BRAKE BRACKET SET - NEW

Fits 1965-1968 Impala Front. New item, never been installed. Made in the USA. Very nice set-up. Comes with hardware and instructions. You would use: 1968 to 1972 Chevelle 11” Rotors, Bearings and Seals. 1972-1978 Full Size Chevy Car...

  • Price: $79.99
  • Sale Price: $59.99

CHEVELLE AND CAMARO SMALL BLOCK POWER STEERING BRACKET - NEW

CHEVELLE AND CAMARO SMALL BLOCK POWER STEERING BRACKET - NEW

These brackets are for the short water pump (note- short water pump only) Can be used with headers or with stock manifolds. Any questions please e-mail us. These brackets are lazer cut, grade 8 bolts. Note: Power Steering Pump NOT included. Only...

  • Price: $54.99
  • Sale Price: $39.99

CHEVY BB ALTERNATOR BRACKET, SHORT WATER PUMP 671 871

CHEVY BB ALTERNATOR BRACKET, SHORT WATER PUMP 671 871

Fits all Big Block Chevy 396, 402, 427, 454, and 502 using short water pump only Lazer cut out of mild steel all grade 8 bolts/hardware very nice. Will also work for 671 or 871 setup.

  • Price: $63.99
  • Sale Price: $49.99

CHEVY BIG BLOCK AC COMPRESSOR BRACKET, SHORT W/P 671 871

CHEVY BIG BLOCK AC COMPRESSOR BRACKET, SHORT W/P 671 871

Fits all Big Block Chevy Chevrolet 396, 402, 427, 454, and 502 using short water pump only. Mounts on the passenger side. These are Laser cut out of mild steel, all grade 8 bolts and hardware very nice. Also works for 671 or 871.

  • Price: $63.99
  • Sale Price: $49.99

CHEVY Big Block POWER STEERING BRACKET, SHORT Water Pumps only

CHEVY Big Block POWER STEERING BRACKET, SHORT Water Pumps only

Fits all Big Block Chevy 396,402,427,454, and 502 using short water pump only. Lazer cut out of mild steel, grade 8 bolts/hardware very nice. Made in USA. Only works with GM, NON-Metric type power steering pumps, the type with flared type...

  • Price: $58.99
  • Sale Price: $47.99

CHEVY SMALL BLOCK AC AND ALTERNATOR BRACKETS SHORT PUMP - NEW

CHEVY SMALL BLOCK AC AND ALTERNATOR BRACKETS SHORT PUMP - NEW

Laser Cut, grade 8 bolts and work with short water pump only. They work with no holes in the end of the cylinder head. Small Block Chevy's only. This Bracket is bare steel and will work on any Chevy with a small block V8 running early style heads...

  • Price: $84.95
  • Sale Price: $69.99

CHEVY SMALL BLOCK ALTERNATOR BRACKETS - NEW

CHEVY SMALL BLOCK ALTERNATOR BRACKETS - NEW

These brackets are laser cut, grade 8 bolts. Works with short water pump only.

  • Price: $59.95
  • Sale Price: $49.99

CHEVY V8 SMALL BLOCK POWER STEERING BRACKET, NEW

CHEVY V8 SMALL BLOCK POWER STEERING BRACKET, NEW

Universal, will work with long or short water pump. Comes with grade 8 bolts. COMES WITH BRACKETS AND BOLTS ONLY. Will NOT work with metric pumps.

  • Price: $57.99
  • Sale Price: $47.99

FORD 9 Inch Big Bearing REAR DISC BRAKE BRACKET SET - NEW

FORD 9 Inch Big Bearing REAR DISC BRAKE BRACKET SET - NEW

FITS FORD 9" BIG BEARING (Early Style), REAR DISC BRAKE SET UP that have the same Backing Plate Spacer measurements as in our photo. the Bolt Holes for plate are for 1/2" T- bolts.

  • Price: $84.99
  • Sale Price: $74.99

FORD 9 Inch SMALL BEARING DISC BRAKE BRACKET SET - NEW

FORD 9 Inch SMALL BEARING DISC BRAKE BRACKET SET - NEW

FITS ALL FORD 9" REAR DISC BRAKE SET UP. SMALL WHEEL BEARING. PLEASE NOTE MEASUREMENTS OF THE BACKING PLATE SPACER IN PHOTO. BOLT HOLES ARE FOR 3/8" BOLTS. IF UNSURE PLEASE CALL BEFORE ORDERING.

  • Price: $84.99
  • Sale Price: $74.99